Tuning Dielectric Properties with Nanofiller Dimensionality in Polymer Nanocomposites

IF 8.3 2区 材料科学 Q1 MATERIALS SCIENCE, MULTIDISCIPLINARY
Farzana Hasan Likhi, Maninderjeet Singh, Hitesh Ravi Potdukhe, Pulickel M. Ajayan, Muhammad M. Rahman, Alamgir Karim
{"title":"Tuning Dielectric Properties with Nanofiller Dimensionality in Polymer Nanocomposites","authors":"Farzana Hasan Likhi, Maninderjeet Singh, Hitesh Ravi Potdukhe, Pulickel M. Ajayan, Muhammad M. Rahman, Alamgir Karim","doi":"10.1021/acsami.4c16329","DOIUrl":null,"url":null,"abstract":"Polymer nanocomposites hold great potential as dielectrics for energy storage devices and flexible electronics. The structural architecture of the nanofillers is expected to play a crucial role in the fundamental mechanisms governing the electrical breakdown and dielectric properties of the nanocomposites. However, the effect of nanofiller structure and dimensionality on these properties has not been studied thoroughly to date. This study explores the critical relationship between nanofiller dimensionality and dielectric properties in polymer nanocomposites. We fabricated polyvinylidene fluoride (PVDF) nanocomposites by incorporating a range of carbon-based nanofillers separately, including zero-dimensional (0D) carbon black (CB), one-dimensional (1D) multiwalled carbon nanotubes (MWCNT), 1D single-walled carbon nanotubes (SWCNT), two-dimensional (2D) reduced graphene oxide (rGO), and three-dimensional (3D) graphite. The frequency-dependent (1 kHz to 1 MHz) dielectric permittivity (<i>k</i>) of the nanocomposites at the same concentration of nanofillers demonstrated a hierarchical order, with MWCNT showing the highest permittivity (∼400%), succeeded by rGO (∼360%), CB (∼290%), SWCNT (∼230%), and graphite (∼70%), respectively. The temperature-dependent (50–150 °C) dielectric spectroscopy revealed high <i>k</i> with increasing temperature due to the enhanced dipole movement. However, their dielectric breakdown strength and energy densities were not correlated to <i>k</i> and exhibited the following order: SWCNT &gt; MWCNT &gt; CB &gt; rGO &gt; graphite. As the electrical breakdown depends upon the nanocomposites’ mechanical strength, we correlated the mechanical properties with the nanofiller dimensionality, and Young’s modulus followed the 1D ≈ 2D &gt; 0D &gt; 3D order. These findings will provide fundamental insights into designing tunable, conducive nanofiller-based nanocomposites in next-generation flexible electronics and capacitive energy storage devices.","PeriodicalId":5,"journal":{"name":"ACS Applied Materials & Interfaces","volume":"1 1","pages":""},"PeriodicalIF":8.3000,"publicationDate":"2024-10-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"ACS Applied Materials & Interfaces","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.1021/acsami.4c16329","RegionNum":2,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 0

Abstract

Polymer nanocomposites hold great potential as dielectrics for energy storage devices and flexible electronics. The structural architecture of the nanofillers is expected to play a crucial role in the fundamental mechanisms governing the electrical breakdown and dielectric properties of the nanocomposites. However, the effect of nanofiller structure and dimensionality on these properties has not been studied thoroughly to date. This study explores the critical relationship between nanofiller dimensionality and dielectric properties in polymer nanocomposites. We fabricated polyvinylidene fluoride (PVDF) nanocomposites by incorporating a range of carbon-based nanofillers separately, including zero-dimensional (0D) carbon black (CB), one-dimensional (1D) multiwalled carbon nanotubes (MWCNT), 1D single-walled carbon nanotubes (SWCNT), two-dimensional (2D) reduced graphene oxide (rGO), and three-dimensional (3D) graphite. The frequency-dependent (1 kHz to 1 MHz) dielectric permittivity (k) of the nanocomposites at the same concentration of nanofillers demonstrated a hierarchical order, with MWCNT showing the highest permittivity (∼400%), succeeded by rGO (∼360%), CB (∼290%), SWCNT (∼230%), and graphite (∼70%), respectively. The temperature-dependent (50–150 °C) dielectric spectroscopy revealed high k with increasing temperature due to the enhanced dipole movement. However, their dielectric breakdown strength and energy densities were not correlated to k and exhibited the following order: SWCNT > MWCNT > CB > rGO > graphite. As the electrical breakdown depends upon the nanocomposites’ mechanical strength, we correlated the mechanical properties with the nanofiller dimensionality, and Young’s modulus followed the 1D ≈ 2D > 0D > 3D order. These findings will provide fundamental insights into designing tunable, conducive nanofiller-based nanocomposites in next-generation flexible electronics and capacitive energy storage devices.

Abstract Image

用聚合物纳米复合材料中的纳米填料尺寸调节介电性能
聚合物纳米复合材料作为储能设备和柔性电子器件的电介质具有巨大潜力。纳米填料的结构体系有望在纳米复合材料的电击穿和介电特性的基本机制中发挥关键作用。然而,迄今为止,纳米填料结构和尺寸对这些性能的影响尚未得到深入研究。本研究探讨了纳米填料尺寸与聚合物纳米复合材料介电性能之间的重要关系。我们通过分别加入一系列碳基纳米填料,包括零维(0D)炭黑(CB)、一维(1D)多壁碳纳米管(MWCNT)、一维单壁碳纳米管(SWCNT)、二维(2D)还原氧化石墨烯(rGO)和三维(3D)石墨,制备了聚偏二氟乙烯(PVDF)纳米复合材料。在纳米填料浓度相同的情况下,纳米复合材料的介电常数(k)随频率变化(1 kHz 至 1 MHz),呈现出分层顺序,MWCNT 的介电常数最高(∼400%),其次分别是 rGO(∼360%)、CB(∼290%)、SWCNT(∼230%)和石墨(∼70%)。随温度变化(50-150 °C)的介电光谱显示,由于偶极运动增强,随着温度的升高,k 值也随之升高。然而,它们的介电击穿强度和能量密度与 k 值并不相关,表现出以下顺序:SWCNT;MWCNT;CB;rGO;石墨。由于电击穿取决于纳米复合材料的机械强度,我们将机械性能与纳米填料的尺寸相关联,杨氏模量遵循 1D ≈ 2D > 0D > 3D 的顺序。这些发现将为在下一代柔性电子器件和电容式储能器件中设计可调的、有利的纳米填料基纳米复合材料提供基本见解。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
ACS Applied Materials & Interfaces
ACS Applied Materials & Interfaces 工程技术-材料科学:综合
CiteScore
16.00
自引率
6.30%
发文量
4978
审稿时长
1.8 months
期刊介绍: ACS Applied Materials & Interfaces is a leading interdisciplinary journal that brings together chemists, engineers, physicists, and biologists to explore the development and utilization of newly-discovered materials and interfacial processes for specific applications. Our journal has experienced remarkable growth since its establishment in 2009, both in terms of the number of articles published and the impact of the research showcased. We are proud to foster a truly global community, with the majority of published articles originating from outside the United States, reflecting the rapid growth of applied research worldwide.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信