Dissolution of Ta–Nb and Nb Minerals in Granitoid Melts

Abstract

The effective solubilities (maximum contents) of Ta and Nb in model felsic lithium-fluoride melts of variable alkalinity and alumina content were experimentally determined at the dissolution of Ta–Nb and Nb minerals: pyrochlore, microlite, ilmenorutile, and ferrotapiolite at T = 650–850°C and P = 100 and 400 MPa. The Ta and Nb partitioning in the mineral-melt systems was also studied. When pyrochlore is dissolved in granitoid melts at P = 100 MPa and T = 650–850°C, the highest effective solubilities of Nb (0.7–1.8 wt %) are obtained in alkaline melt, and they significantly decrease (to 0.03–0.5 wt %) in subaluminous and peraluminous melts. A temperature increase increases the solubility (content) of Nb in the melt. Similar dependences were obtained for Ta solubility by dissolving microlite. In peraluminous granitoid melt, microlite remains stable, while pyrochlore becomes unstable. A pressure decrease from 400 to 100 MPa in alkaline and subaluminous melts was found out to not significantly affect on the dissolution of microlite and pyrochlore, whereas Ta and Nb contents in the peraluminous melt noticeably decrease. The dependences of Nb solubility and its partitioning between granitoid melts and ilmenorutile on the alkalinity–alumina content of the melt are similar to those for the dissolution of columbite and tantalite. The dependences obtained by dissolving ferrotapiolite, pyrochlore, and microlite differ from them.