{"title":"Hydrophobic and positively charged magnetic nanoparticles for enhanced oil recovery from concentrated emulsion wastewaters","authors":"","doi":"10.1016/j.seppur.2024.129782","DOIUrl":null,"url":null,"abstract":"<div><p>With the development of petroleum industry, a large amount of oil-in-water (O/W) emulsion wastewaters were produced, resulting in serious environmental pollution and resource waste. Up till now, magnetic nanoparticles (MNPs) were frequently reported in emulsion wastewater treatment and mainly focused on the water purification, but little effort was devoted to the facile recovery of oil resource. In the present work, a class of hydrophobic and positively charged MNPs, namely dimethyloctadecyl [3-(trimethoxysilyl) propyl] ammonium chloride (DOTAC)-coated MNPs (M−DOTAC), was carefully synthesized by regulating DOTAC anchoring density on Fe<sub>3</sub>O<sub>4</sub>@SiO<sub>2</sub>, and then employed to treat the concentrated emulsion wastewaters stabilized by anionic sodium dodecyl benzene sulfonate (SDBS) or nonionic Tween-80. M−DOTAC with relatively high DOTAC density (M−DOTAC 1.8) exhibited higher positive charge density and hydrophobicity, and hence could significantly promote the oil droplet coalescence and mergence via the electrostatic attraction and hydrophobic adsorption bridging as well as the hydrophilic-lipophilic transition of interfacial adsorption layer. Accordingly, with addition of moderate dosage of M−DOTAC 1.8, the emulsion was broken and divided into three layers: (1) a continuous oil layer was formed in the upper layer which could be directly recycled; (2) the middle layer was composed of MNPs-tagged oil droplets/flocs; (3) the bottom layer was the clearer water phase. The optimal recovery rate of oil resource reached ∼ 60 % in SDBS stabilized system, and further increased to ∼ 98 % in Tween-80 stabilized system. However, the oil recovery rate was declined at an excessive dosage of M−DOTAC 1.8 due the formation of double emulsion. Besides, M−DOTAC 1.8 exhibited good reusability. These results indicated the fabricated M−DOTAC had great application prospect in treating emulsion wastewaters containing high oil content.</p></div>","PeriodicalId":427,"journal":{"name":"Separation and Purification Technology","volume":null,"pages":null},"PeriodicalIF":8.1000,"publicationDate":"2024-09-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Separation and Purification Technology","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S1383586624035214","RegionNum":1,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ENGINEERING, CHEMICAL","Score":null,"Total":0}
引用次数: 0
Abstract
With the development of petroleum industry, a large amount of oil-in-water (O/W) emulsion wastewaters were produced, resulting in serious environmental pollution and resource waste. Up till now, magnetic nanoparticles (MNPs) were frequently reported in emulsion wastewater treatment and mainly focused on the water purification, but little effort was devoted to the facile recovery of oil resource. In the present work, a class of hydrophobic and positively charged MNPs, namely dimethyloctadecyl [3-(trimethoxysilyl) propyl] ammonium chloride (DOTAC)-coated MNPs (M−DOTAC), was carefully synthesized by regulating DOTAC anchoring density on Fe3O4@SiO2, and then employed to treat the concentrated emulsion wastewaters stabilized by anionic sodium dodecyl benzene sulfonate (SDBS) or nonionic Tween-80. M−DOTAC with relatively high DOTAC density (M−DOTAC 1.8) exhibited higher positive charge density and hydrophobicity, and hence could significantly promote the oil droplet coalescence and mergence via the electrostatic attraction and hydrophobic adsorption bridging as well as the hydrophilic-lipophilic transition of interfacial adsorption layer. Accordingly, with addition of moderate dosage of M−DOTAC 1.8, the emulsion was broken and divided into three layers: (1) a continuous oil layer was formed in the upper layer which could be directly recycled; (2) the middle layer was composed of MNPs-tagged oil droplets/flocs; (3) the bottom layer was the clearer water phase. The optimal recovery rate of oil resource reached ∼ 60 % in SDBS stabilized system, and further increased to ∼ 98 % in Tween-80 stabilized system. However, the oil recovery rate was declined at an excessive dosage of M−DOTAC 1.8 due the formation of double emulsion. Besides, M−DOTAC 1.8 exhibited good reusability. These results indicated the fabricated M−DOTAC had great application prospect in treating emulsion wastewaters containing high oil content.
期刊介绍:
Separation and Purification Technology is a premier journal committed to sharing innovative methods for separation and purification in chemical and environmental engineering, encompassing both homogeneous solutions and heterogeneous mixtures. Our scope includes the separation and/or purification of liquids, vapors, and gases, as well as carbon capture and separation techniques. However, it's important to note that methods solely intended for analytical purposes are not within the scope of the journal. Additionally, disciplines such as soil science, polymer science, and metallurgy fall outside the purview of Separation and Purification Technology. Join us in advancing the field of separation and purification methods for sustainable solutions in chemical and environmental engineering.