Transferring melt pool knowledge between multiple materials in laser-directed energy deposition via Gaussian process regression

Abstract

Laser-directed energy deposition (L-DED) enables the creation of near-net-shape parts with location-specific materials, repair of machine components, and addition of features to existing parts. However, gathering sufficient experimental L-DED data to establish process maps is challenging especially when expensive materials are being investigated. Despite the interest in data-driven modeling for developing such maps, few studies have considered reusing knowledge across multiple materials including uncertainty quantification (UQ). To address this, knowledge transfer methods based on Gaussian process (GP) are proposed. Melt pool data for SS316L and IN718 are used to emulate data-rich and data-scarce conditions, respectively. Three avenues are explored: (i) mixing the data of both materials to train a single GP regression model (the mixed-input model), (ii) relation-based transfer learning (RB-TL) model, and (iii) multi-fidelity GP-based transfer learning (MFGP-TL) model. Results show that the mixed-input model outperforms the baseline or no-transfer model under data-deficient conditions. Compared to the baseline model, the RB-TL model exhibits a general improvement in accuracy and confidence while consuming the least computation time among all proposed models. The MFGP-TL model achieves the best performance, which is only half the error and standard deviation observed for the RB-TL model, albeit resulting in longer computation times. Finally, the proposed transfer learning models, when used on experimental data obtained from the literature, show 22–31% and 24–40% improvement over the baseline model for IN718 and IN625, respectively. This work, therefore, facilitates data- and cost-effective UQ-based knowledge transfer in reconstructing process maps in L-DED.