Effect of pre-aging intermediate layers on the performance of multi-layer organic photovoltaic devices

Abstract

Understanding the degradation behaviour of organic photovoltaic (OPV) devices is an essential part to improve their stability prior to massive production. Accelerated aging can help to assess their stability and study the underlying degradation mechanisms of OPVs. Most studies focus on individual layers or a full device, and little is known about the role a pre-aged layer stack plays in the performance of a device. Herein, we report the investigation of the effects of pre-aging of multiple layers on the performance of OPVs. Instead of aging a single layer or an entire stack (sequential layers: ITO/PEDOT:PSS/MoOx/F-BsubPc/C₆₀/BCP/Ag), our process involved aging the intermediate layer stack for 24 h after depositing a specific layer before continuing with the subsequent depositions to fully fabricate/manufacture OPVs. Aging was conducted under four controlled conditions considering parameters including moisture, gas type, and temperature in the absence of light according to the International Summit on Organic Photovoltaic Stability (ISOS) protocols. Short of PEDOT:PSS we found that multiple layers, being subjected to the parameters, resulted in a decline in OPV device performance after being fully manufactured. Device performance is evaluated based on short-circuit current density (J_sc), power conversion efficiency (PCE), and open-circuit voltage (V_oc). Our analysis provides insight into the degradation mechanisms of layered/planar OPV structures and offers strategic guidance for optimizing fabrication processes, particularly during the layer deposition transitions. We recommend that during OPV vacuum deposited fabrication, intermediate layers should be protected from moisture, O₂, high temperature, and even inert gases, preferably in a low-vacuum environment.