Enhancing Mechanical Properties of Cast Ingot Al6061 Alloy Using ECAP Process

Abstract

Grain refinement and mechanical property enhancement of cast ingot aluminum 6061 alloy were achieved using equal-channel angular pressing (ECAP) at room temperature, employing route A and route R types. Analytical, finite element and experimental methods were utilized to investigate the alloy’s deformation behavior under the ECAP process. The tensile tests conducted at room temperature demonstrated a significant increase in strength with an increasing number of pressings, reaching 44.23, 53.19, and 56.7% for 1-pass, route A, and route R types 2-passes of the ECAP process, respectively. However, ductility, as indicated by elongation, gradually decreased after the first pressing. Electron backscatter diffraction was employed to reveal submicrometer grain sizes resulting from the ECAP process. The grain structure showed substantial improvement under route A and route R types at a 2-passes ECAP process. Wear tests conducted under loads of 10 and 25 N showed an increase in the coefficient of friction within the minimum wear loss intervals. Rockwell hardness also exhibited a significant increase of 119.3, 176.3, and 164.8% at 1-pass and 2-passes using routes R and A, respectively. As part of the evaluation, analytical models were computed using Python, and finite element simulations were performed using ABAQUS software. The results from analytical and finite element simulations demonstrated good agreement with the experimental data.