Fracture energy of birch in tension perpendicular to grain: experimental evaluation and comparative numerical simulations

Abstract

The present work has experimentally determined the specific fracture energy of the hardwood species silver birch (Betula pendula), which in recent times has caught increased attention for utilization in structural applications. The single-edge-notched beam loaded in three-point-bending was utilized for evaluating the fracture energy with the work-of-fracture method. In addition to birch, Norway spruce (Picea abies) was utilized as a reference material. The effect of two different geometries of the fracture area for each species was evaluated—one triangular and one rectangular fracture area. It should be noted that the geometry of the fracture area did influence the evaluated fracture energy, and this influence was not consistent between species. This was likely in part due to manufacturing difficulties with the triangular fracture area. In addition to the experimental testing, a numerical 2d-model including linear strain-softening behavior was used for comparative simulations. The numerical 2d-models showed reasonable agreement with the experimental results regarding the global load vs. displacement response, despite their relative simple nature. The specific fracture energy for the spruce specimens was evaluated to 221 J/\(\hbox {m}^2\) and for the birch specimens to 656 J/\(\hbox {m}^2\). Consequently, the present work implies a marked increase in specific fracture energy for birch, compared to spruce. This increase in specific fracture energy could potentially have a large influence on the failure behavior of birch when used in structural applications which is something that needs to be considered in future work.