Combined analysis of the microstructure of wood swollen by water and/or ethanol through dynamic mechanical analysis and small-angle X-ray scattering

IF 3.1 2区 农林科学 Q1 FORESTRY
Hiroaki Horiyama, Keisuke Kojiro, Yoko Okahisa, Tomoya Imai, Yuzo Furuta
{"title":"Combined analysis of the microstructure of wood swollen by water and/or ethanol through dynamic mechanical analysis and small-angle X-ray scattering","authors":"Hiroaki Horiyama, Keisuke Kojiro, Yoko Okahisa, Tomoya Imai, Yuzo Furuta","doi":"10.1007/s00226-024-01599-2","DOIUrl":null,"url":null,"abstract":"<p>Dynamic mechanical analysis and small-angle X-ray scattering (SAXS) measurements of hinoki wood swollen with water and/or ethanol in the temperature range of 20–78/95 °C were performed to clarify the relationship between swelling and microstructure in different swelling states. For the sample swollen in a water–ethanol mixture with an ethanol mole fraction of 0.2, a peak in tan<i>δ</i>, i.e., the ratio of the dynamic elastic modulus (<i>E′</i>) to the dynamic loss modulus (<i>E″</i>), was observed at around 50 °C. No clear peak was observed in the temperature range of the sample swollen with water or ethanol, but thermal softening behavior due to micro-Brownian motion of lignin was observed. The scattering behavior of the samples swollen with water and/or ethanol differed significantly from one solution to another. The SAXS intensity of samples swollen with water or mixture of water and ethanol increased with increasing temperature, while the SAXS intensity of samples swollen with ethanol changed little with increasing temperature. This suggested that the adsorption sites of ethanol were different. The position of the peak for the sample swollen with the water–ethanol mixture, observed in the Kratky plot, was shifted to the low-<i>q</i> side compared to the pure liquid. It was suggested that the aggregation state of the sample swollen with the mixture of water and ethanol was very different from those of the wood swollen with the pure liquid.</p>","PeriodicalId":810,"journal":{"name":"Wood Science and Technology","volume":null,"pages":null},"PeriodicalIF":3.1000,"publicationDate":"2024-09-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Wood Science and Technology","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.1007/s00226-024-01599-2","RegionNum":2,"RegionCategory":"农林科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"FORESTRY","Score":null,"Total":0}
引用次数: 0

Abstract

Dynamic mechanical analysis and small-angle X-ray scattering (SAXS) measurements of hinoki wood swollen with water and/or ethanol in the temperature range of 20–78/95 °C were performed to clarify the relationship between swelling and microstructure in different swelling states. For the sample swollen in a water–ethanol mixture with an ethanol mole fraction of 0.2, a peak in tanδ, i.e., the ratio of the dynamic elastic modulus (E′) to the dynamic loss modulus (E″), was observed at around 50 °C. No clear peak was observed in the temperature range of the sample swollen with water or ethanol, but thermal softening behavior due to micro-Brownian motion of lignin was observed. The scattering behavior of the samples swollen with water and/or ethanol differed significantly from one solution to another. The SAXS intensity of samples swollen with water or mixture of water and ethanol increased with increasing temperature, while the SAXS intensity of samples swollen with ethanol changed little with increasing temperature. This suggested that the adsorption sites of ethanol were different. The position of the peak for the sample swollen with the water–ethanol mixture, observed in the Kratky plot, was shifted to the low-q side compared to the pure liquid. It was suggested that the aggregation state of the sample swollen with the mixture of water and ethanol was very different from those of the wood swollen with the pure liquid.

Abstract Image

通过动态力学分析和小角 X 射线散射综合分析受水和/或乙醇影响而膨胀的木材的微观结构
在 20-78/95 °C 温度范围内,对用水和/或乙醇溶胀的桧木进行了动态力学分析和小角 X 射线散射(SAXS)测量,以阐明不同溶胀状态下溶胀与微观结构之间的关系。对于在乙醇摩尔分数为 0.2 的水乙醇混合物中溶胀的样品,在约 50 °C 时观察到 tanδ 的峰值,即动态弹性模量(E′)与动态损耗模量(E″)之比。用水或乙醇溶胀的样品在温度范围内没有观察到明显的峰值,但观察到由于木质素的微布朗运动而产生的热软化行为。用水和/或乙醇溶胀的样品在不同溶液中的散射行为差异很大。用水或水与乙醇混合溶液溶胀的样品的 SAXS 强度随温度升高而增加,而用乙醇溶胀的样品的 SAXS 强度随温度升高变化不大。这表明乙醇的吸附位点不同。从 Kratky 图中观察到,与纯液体相比,水和乙醇混合物溶胀样品的峰值位置偏向低 q 侧。这表明水和乙醇混合物溶胀的样品与纯液体溶胀的木材的聚集状态截然不同。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
Wood Science and Technology
Wood Science and Technology 工程技术-材料科学:纸与木材
CiteScore
5.90
自引率
5.90%
发文量
75
审稿时长
3 months
期刊介绍: Wood Science and Technology publishes original scientific research results and review papers covering the entire field of wood material science, wood components and wood based products. Subjects are wood biology and wood quality, wood physics and physical technologies, wood chemistry and chemical technologies. Latest advances in areas such as cell wall and wood formation; structural and chemical composition of wood and wood composites and their property relations; physical, mechanical and chemical characterization and relevant methodological developments, and microbiological degradation of wood and wood based products are reported. Topics related to wood technology include machining, gluing, and finishing, composite technology, wood modification, wood mechanics, creep and rheology, and the conversion of wood into pulp and biorefinery products.
文献相关原料
公司名称 产品信息 采购帮参考价格
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信