Finite element modelling of ultrasonic assisted hot pressing of metal powder

IF 2.1 4区材料科学 Q2 MATERIALS SCIENCE, CHARACTERIZATION & TESTING

Mechanics of Time-Dependent Materials Pub Date : 2024-08-27 DOI:10.1007/s11043-024-09735-y

Rezvan Abedini, Vahid Fartashvand, Amir Abdullah, Yunes Alizadeh

{"title":"Finite element modelling of ultrasonic assisted hot pressing of metal powder","authors":"Rezvan Abedini, Vahid Fartashvand, Amir Abdullah, Yunes Alizadeh","doi":"10.1007/s11043-024-09735-y","DOIUrl":null,"url":null,"abstract":"<p>Ultrasonication has widely been used in many industries to develop advanced materials, improve materials behaviors, and enhance mechanical strength to name a few. The present investigation aims to accelerate the densification mechanisms during the hot-pressing process of Ti-6Al-4 V powder through high power ultrasonication. A computational study has been developed and implemented to simulate the consolidation behavior, then compared with the experimental data to ensure the simulation accuracy. The constitutive equations, encompassing thermoplastic and power-law creep models, were implemented in the simulation as UMAT and CREEP subroutines. Finally, the simulation results in densification curves and density distribution have been compared with the results of experimental tests. The comparison of the simulation and experimental results shows a maximum error of 6.8 and 2.8% in predicting the densification behavior of hot pressing without and with ultrasonication, respectively. The results show the good accuracy of the simulation in predicting final relative density and density distribution with ultrasonic vibrations.</p>","PeriodicalId":698,"journal":{"name":"Mechanics of Time-Dependent Materials","volume":"18 1","pages":""},"PeriodicalIF":2.1000,"publicationDate":"2024-08-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Mechanics of Time-Dependent Materials","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.1007/s11043-024-09735-y","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"MATERIALS SCIENCE, CHARACTERIZATION & TESTING","Score":null,"Total":0}

引用次数: 0

Abstract

Ultrasonication has widely been used in many industries to develop advanced materials, improve materials behaviors, and enhance mechanical strength to name a few. The present investigation aims to accelerate the densification mechanisms during the hot-pressing process of Ti-6Al-4 V powder through high power ultrasonication. A computational study has been developed and implemented to simulate the consolidation behavior, then compared with the experimental data to ensure the simulation accuracy. The constitutive equations, encompassing thermoplastic and power-law creep models, were implemented in the simulation as UMAT and CREEP subroutines. Finally, the simulation results in densification curves and density distribution have been compared with the results of experimental tests. The comparison of the simulation and experimental results shows a maximum error of 6.8 and 2.8% in predicting the densification behavior of hot pressing without and with ultrasonication, respectively. The results show the good accuracy of the simulation in predicting final relative density and density distribution with ultrasonic vibrations.

Abstract Image

查看原文本刊更多论文

金属粉末超声波辅助热压的有限元建模

超声技术已广泛应用于许多行业，如开发先进材料、改善材料性能和提高机械强度等。本研究旨在通过高功率超声加速 Ti-6Al-4 V 粉末热压过程中的致密化机制。我们开发并实施了一项计算研究来模拟固结行为，然后与实验数据进行比较，以确保模拟的准确性。包括热塑性和幂律蠕变模型在内的构成方程以 UMAT 和 CREEP 子程序的形式在模拟中实现。最后，将致密化曲线和密度分布的模拟结果与实验测试结果进行了比较。模拟结果和实验结果的对比显示，在预测不使用超声波和使用超声波的热压工艺的致密化行为时，最大误差分别为 6.8%和 2.8%。结果表明，模拟在预测超声波振动的最终相对密度和密度分布方面具有良好的准确性。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Mechanics of Time-Dependent Materials 工程技术-材料科学：表征与测试

CiteScore

4.90

自引率

8.00%

发文量

审稿时长

>12 weeks

期刊介绍： Mechanics of Time-Dependent Materials accepts contributions dealing with the time-dependent mechanical properties of solid polymers, metals, ceramics, concrete, wood, or their composites. It is recognized that certain materials can be in the melt state as function of temperature and/or pressure. Contributions concerned with fundamental issues relating to processing and melt-to-solid transition behaviour are welcome, as are contributions addressing time-dependent failure and fracture phenomena. Manuscripts addressing environmental issues will be considered if they relate to time-dependent mechanical properties. The journal promotes the transfer of knowledge between various disciplines that deal with the properties of time-dependent solid materials but approach these from different angles. Among these disciplines are: Mechanical Engineering, Aerospace Engineering, Chemical Engineering, Rheology, Materials Science, Polymer Physics, Design, and others.