{"title":"A discrete CMUT self-biasing circuit towards implanted devices application","authors":"","doi":"10.1016/j.sna.2024.115855","DOIUrl":null,"url":null,"abstract":"<div><p>Wireless power transfer is an essential feature of biomedical engineering. It reduces the need for energy storage devices in medical implants. To recharge a body implanted battery, a convenient way is to transmit ultrasounds through the skin to a connected ultrasonic transducer. Lead-less, System-on-Chip compatible (SoC) and wideband, Capacitive Micromachined Ultrasonic Transducers (CMUT) are competitive with piezoelectric based technologies. However, their need for a high bias voltage is an obstacle to their use in implanted medical devices (IMDs). The voltage source required must meet precise specifications, such as reliability and volume, which the research community intends to respect. To meet this challenge, this work proposes an electronic circuit that allows a CMUT device to self-bias from a very low initial energy input. After presenting the electronic architecture and its main features, simulation and experimental results validate the solution’s working principle and operating points. With an electronic circuit made up of discrete components, a bias voltage of 60 V is built up from an implanted battery voltage of 2.2 V and an incident pressure of 120 kPa in water.</p></div>","PeriodicalId":21689,"journal":{"name":"Sensors and Actuators A-physical","volume":null,"pages":null},"PeriodicalIF":4.1000,"publicationDate":"2024-09-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://www.sciencedirect.com/science/article/pii/S0924424724008495/pdfft?md5=af9c1d8662c4abac277ed2100f012740&pid=1-s2.0-S0924424724008495-main.pdf","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Sensors and Actuators A-physical","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0924424724008495","RegionNum":3,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"ENGINEERING, ELECTRICAL & ELECTRONIC","Score":null,"Total":0}
引用次数: 0
Abstract
Wireless power transfer is an essential feature of biomedical engineering. It reduces the need for energy storage devices in medical implants. To recharge a body implanted battery, a convenient way is to transmit ultrasounds through the skin to a connected ultrasonic transducer. Lead-less, System-on-Chip compatible (SoC) and wideband, Capacitive Micromachined Ultrasonic Transducers (CMUT) are competitive with piezoelectric based technologies. However, their need for a high bias voltage is an obstacle to their use in implanted medical devices (IMDs). The voltage source required must meet precise specifications, such as reliability and volume, which the research community intends to respect. To meet this challenge, this work proposes an electronic circuit that allows a CMUT device to self-bias from a very low initial energy input. After presenting the electronic architecture and its main features, simulation and experimental results validate the solution’s working principle and operating points. With an electronic circuit made up of discrete components, a bias voltage of 60 V is built up from an implanted battery voltage of 2.2 V and an incident pressure of 120 kPa in water.
期刊介绍:
Sensors and Actuators A: Physical brings together multidisciplinary interests in one journal entirely devoted to disseminating information on all aspects of research and development of solid-state devices for transducing physical signals. Sensors and Actuators A: Physical regularly publishes original papers, letters to the Editors and from time to time invited review articles within the following device areas:
• Fundamentals and Physics, such as: classification of effects, physical effects, measurement theory, modelling of sensors, measurement standards, measurement errors, units and constants, time and frequency measurement. Modeling papers should bring new modeling techniques to the field and be supported by experimental results.
• Materials and their Processing, such as: piezoelectric materials, polymers, metal oxides, III-V and II-VI semiconductors, thick and thin films, optical glass fibres, amorphous, polycrystalline and monocrystalline silicon.
• Optoelectronic sensors, such as: photovoltaic diodes, photoconductors, photodiodes, phototransistors, positron-sensitive photodetectors, optoisolators, photodiode arrays, charge-coupled devices, light-emitting diodes, injection lasers and liquid-crystal displays.
• Mechanical sensors, such as: metallic, thin-film and semiconductor strain gauges, diffused silicon pressure sensors, silicon accelerometers, solid-state displacement transducers, piezo junction devices, piezoelectric field-effect transducers (PiFETs), tunnel-diode strain sensors, surface acoustic wave devices, silicon micromechanical switches, solid-state flow meters and electronic flow controllers.
Etc...