Mechanism of pre-tension on the impact response of plain weave fabric: Experimental and numerical investigation

IF 5.1 2区 工程技术 Q1 ENGINEERING, MECHANICAL
Cong Chen , Shuchang Long , Heran Wang , Xiaohu Yao
{"title":"Mechanism of pre-tension on the impact response of plain weave fabric: Experimental and numerical investigation","authors":"Cong Chen ,&nbsp;Shuchang Long ,&nbsp;Heran Wang ,&nbsp;Xiaohu Yao","doi":"10.1016/j.ijimpeng.2024.105096","DOIUrl":null,"url":null,"abstract":"<div><p>The fabrics made of high strength and toughness fibers are increasingly used in the structural and individual protection. The research on energy dissipation mechanism and the improvement methods for improving energy dissipation of the fabric under impact, as well as the change of ballistic limit velocity under pre-stress, is relatively mature. However, the transmission mode and velocity of transverse wave in the fabric, as well as the method of accurate finite element simulation is still lacking. In this paper, the transverse impact response of ultra high molecular weight polyethylene (UHMWPE) fabric subjected to fragment impact is studied experimentally and numerically. A novel biaxial pre-tension fixture was developed, and fragment impact test of the fabric in pre-tension state was realized using a gas gun. The displacement-time history of each point on the fabric in three-dimensional space was characterized through 3-D DIC technology, and the process of transverse wave transmission on the fabric after fragment impact was obtained. The calculated results of the finite element model established by truss element agrees reasonably well with the experimental results. The experimental and numerical results indicate that the impact velocity of fragment affects the velocity of transverse wave in the fabric, but does not change its transmission mode. With the increase of pre-tension amount, the propagation mode changes from a cross shape to a rhombic shape and finally to a circular shape, and the wave velocity increases greatly. The wave transmission process in yarns at a mesoscopic level was analyzed through finite element simulation, and the transmission path was determined. It was found that pre-tension accelerated the wave velocity on the stepwise path, causing the transverse wave to reach a farther position in the diagonal direction of the fabric, resulting in different modes of wave transmission. The research content may provide more ways for the application of fabrics in protection.</p></div>","PeriodicalId":50318,"journal":{"name":"International Journal of Impact Engineering","volume":"194 ","pages":"Article 105096"},"PeriodicalIF":5.1000,"publicationDate":"2024-08-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Impact Engineering","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0734743X24002215","RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ENGINEERING, MECHANICAL","Score":null,"Total":0}
引用次数: 0

Abstract

The fabrics made of high strength and toughness fibers are increasingly used in the structural and individual protection. The research on energy dissipation mechanism and the improvement methods for improving energy dissipation of the fabric under impact, as well as the change of ballistic limit velocity under pre-stress, is relatively mature. However, the transmission mode and velocity of transverse wave in the fabric, as well as the method of accurate finite element simulation is still lacking. In this paper, the transverse impact response of ultra high molecular weight polyethylene (UHMWPE) fabric subjected to fragment impact is studied experimentally and numerically. A novel biaxial pre-tension fixture was developed, and fragment impact test of the fabric in pre-tension state was realized using a gas gun. The displacement-time history of each point on the fabric in three-dimensional space was characterized through 3-D DIC technology, and the process of transverse wave transmission on the fabric after fragment impact was obtained. The calculated results of the finite element model established by truss element agrees reasonably well with the experimental results. The experimental and numerical results indicate that the impact velocity of fragment affects the velocity of transverse wave in the fabric, but does not change its transmission mode. With the increase of pre-tension amount, the propagation mode changes from a cross shape to a rhombic shape and finally to a circular shape, and the wave velocity increases greatly. The wave transmission process in yarns at a mesoscopic level was analyzed through finite element simulation, and the transmission path was determined. It was found that pre-tension accelerated the wave velocity on the stepwise path, causing the transverse wave to reach a farther position in the diagonal direction of the fabric, resulting in different modes of wave transmission. The research content may provide more ways for the application of fabrics in protection.

预拉伸对平纹织物冲击响应的影响机制:实验和数值研究
由高强度和高韧性纤维制成的织物越来越多地应用于结构和个体防护领域。关于织物在冲击作用下的耗能机理和提高耗能效果的改进方法,以及预应力作用下弹道极限速度变化的研究已相对成熟。然而,横波在织物中的传播方式和速度,以及精确的有限元模拟方法仍然缺乏。本文通过实验和数值模拟研究了超高分子量聚乙烯(UHMWPE)织物在受到碎片冲击时的横向冲击响应。开发了一种新型双轴预拉伸夹具,并使用气枪实现了织物在预拉伸状态下的碎片冲击试验。通过三维 DIC 技术表征了织物上各点在三维空间中的位移时间历程,并获得了碎片冲击后横波在织物上的传播过程。用桁架元素建立的有限元模型的计算结果与实验结果吻合较好。实验和数值结果表明,碎片的冲击速度会影响横波在织物中的传播速度,但不会改变其传播方式。随着预拉伸量的增加,传播模式由十字形变为菱形,最后变为圆形,波速也大大增加。通过有限元模拟分析了纱线在介观层面上的波传播过程,并确定了传播路径。研究发现,预拉伸加速了阶梯路径上的波速,使横波到达织物对角线方向上更远的位置,从而形成不同的波传播模式。研究内容可为织物在防护领域的应用提供更多途径。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
International Journal of Impact Engineering
International Journal of Impact Engineering 工程技术-工程:机械
CiteScore
8.70
自引率
13.70%
发文量
241
审稿时长
52 days
期刊介绍: The International Journal of Impact Engineering, established in 1983 publishes original research findings related to the response of structures, components and materials subjected to impact, blast and high-rate loading. Areas relevant to the journal encompass the following general topics and those associated with them: -Behaviour and failure of structures and materials under impact and blast loading -Systems for protection and absorption of impact and blast loading -Terminal ballistics -Dynamic behaviour and failure of materials including plasticity and fracture -Stress waves -Structural crashworthiness -High-rate mechanical and forming processes -Impact, blast and high-rate loading/measurement techniques and their applications
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信