Characterization of tornado-induced wind pressures on a multi-span light steel industrial building

Abstract

This study presents the characteristics of external wind pressures of a multi-span light steel industrial building through wind pressure measurements conducted in a tornado simulator. The test model is designed as a three-span low-rise building with gable roofs according to the practical measured sizes and shapes of the light steel industrial building destroyed in the Shengze tornado, China (2021). The distance from the tornado-like vortex center to the building, building orientation, roof angle, and swirl ratio are considered as experimental parameters. The effects of the parameters on the most unfavorable peak and mean pressure coefficients of each surface are analyzed. The roof zoning specified in ASCE 7–16 was re-analyzed based on the characteristics of wind pressure coefficients, and the tornado design pressure coefficients were calculated. The results of the analysis illustrate that the wind-ward roof surface at a distance of around one vortex core radius from the center experience the most severe pressure coefficient under tornado, the most unfavorable zone of the pressure coefficients on the building roof changes with the building orientation, the model with a smaller roof angle has smoother pressure coefficient contours than that with a larger roof angle because of the cutting effect of the ridge, and the simulated tornado with the lower swirl ratio generate higher external pressure coefficients on the building model. Moreover, the roof zoning in ASCE 7–16 for the boundary layer wind is not precise for tornado, thus an updated roof zoning for the tornado design pressure coefficients is defined.