Research on ground mobile robot trajectory tracking control based on MPC and ANFIS

IF 5.4 2区 计算机科学 Q1 AUTOMATION & CONTROL SYSTEMS
Yulong You , Zhong Yang , Hao-ze Zhuo , Yaoyu Sui
{"title":"Research on ground mobile robot trajectory tracking control based on MPC and ANFIS","authors":"Yulong You ,&nbsp;Zhong Yang ,&nbsp;Hao-ze Zhuo ,&nbsp;Yaoyu Sui","doi":"10.1016/j.conengprac.2024.106040","DOIUrl":null,"url":null,"abstract":"<div><p>This study focuses on the control strategy for a ground mobile robot (GMR) with independent three-axis six-wheel drive and four-wheel independent steering, performing double lane change trajectory tracking in complex scenarios. Initially, a dynamic model of the six-wheel independent drive and steering GMR was constructed. Utilizing Model Predictive Control (MPC) technology, the challenge of trajectory tracking at low speeds was effectively addressed. For high-speed conditions, by thoroughly analyzing the impact of the predictive time-domain, this study innovatively introduced an Adaptive Neuro-Fuzzy Inference System (ANFIS) to dynamically adjust the prediction horizon of the MPC. A novel trajectory tracking algorithm integrating MPC and ANFIS was developed, with the network structure being trained using backpropagation (BP) method and the least squares method. Compared to traditional MPC, this hybrid strategy significantly improves trajectory tracking accuracy and stability at high speeds, with computational efficiency increased by 48.65%. Additionally, the algorithm demonstrated excellent adaptability and control effectiveness in various rigorous tests, including different speed levels, complex steering paths, load changes, sudden obstacles, and variable terrain. A 70 km/h trajectory tracking experiment on a physical vehicle yielded a root mean square (RMS) error of 0.1904 m, verifying its superior tracking performance and practical reliability. This provides a pioneering solution for high-performance trajectory control of ground mobile robots.</p></div>","PeriodicalId":50615,"journal":{"name":"Control Engineering Practice","volume":null,"pages":null},"PeriodicalIF":5.4000,"publicationDate":"2024-08-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Control Engineering Practice","FirstCategoryId":"94","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0967066124001990","RegionNum":2,"RegionCategory":"计算机科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"AUTOMATION & CONTROL SYSTEMS","Score":null,"Total":0}
引用次数: 0

Abstract

This study focuses on the control strategy for a ground mobile robot (GMR) with independent three-axis six-wheel drive and four-wheel independent steering, performing double lane change trajectory tracking in complex scenarios. Initially, a dynamic model of the six-wheel independent drive and steering GMR was constructed. Utilizing Model Predictive Control (MPC) technology, the challenge of trajectory tracking at low speeds was effectively addressed. For high-speed conditions, by thoroughly analyzing the impact of the predictive time-domain, this study innovatively introduced an Adaptive Neuro-Fuzzy Inference System (ANFIS) to dynamically adjust the prediction horizon of the MPC. A novel trajectory tracking algorithm integrating MPC and ANFIS was developed, with the network structure being trained using backpropagation (BP) method and the least squares method. Compared to traditional MPC, this hybrid strategy significantly improves trajectory tracking accuracy and stability at high speeds, with computational efficiency increased by 48.65%. Additionally, the algorithm demonstrated excellent adaptability and control effectiveness in various rigorous tests, including different speed levels, complex steering paths, load changes, sudden obstacles, and variable terrain. A 70 km/h trajectory tracking experiment on a physical vehicle yielded a root mean square (RMS) error of 0.1904 m, verifying its superior tracking performance and practical reliability. This provides a pioneering solution for high-performance trajectory control of ground mobile robots.

Abstract Image

基于 MPC 和 ANFIS 的地面移动机器人轨迹跟踪控制研究
本研究的重点是具有独立三轴六轮驱动和四轮独立转向功能的地面移动机器人(GMR)在复杂场景中执行双变道轨迹跟踪的控制策略。首先,构建了六轮独立驱动和转向 GMR 的动态模型。利用模型预测控制(MPC)技术,有效地解决了低速时轨迹跟踪的难题。对于高速工况,通过深入分析预测时域的影响,本研究创新性地引入了自适应神经模糊推理系统(ANFIS),以动态调整 MPC 的预测范围。研究开发了一种集成了 MPC 和 ANFIS 的新型轨迹跟踪算法,网络结构采用反向传播(BP)方法和最小二乘法进行训练。与传统的 MPC 相比,这种混合策略显著提高了高速运行时的轨迹跟踪精度和稳定性,计算效率提高了 48.65%。此外,该算法在不同速度水平、复杂转向路径、负载变化、突发障碍和多变地形等各种严格测试中都表现出了出色的适应性和控制效果。在一辆实际车辆上进行的 70 km/h 轨迹跟踪实验得出的均方根(RMS)误差为 0.1904 m,验证了其卓越的跟踪性能和实用可靠性。这为地面移动机器人的高性能轨迹控制提供了一个开创性的解决方案。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
Control Engineering Practice
Control Engineering Practice 工程技术-工程:电子与电气
CiteScore
9.20
自引率
12.20%
发文量
183
审稿时长
44 days
期刊介绍: Control Engineering Practice strives to meet the needs of industrial practitioners and industrially related academics and researchers. It publishes papers which illustrate the direct application of control theory and its supporting tools in all possible areas of automation. As a result, the journal only contains papers which can be considered to have made significant contributions to the application of advanced control techniques. It is normally expected that practical results should be included, but where simulation only studies are available, it is necessary to demonstrate that the simulation model is representative of a genuine application. Strictly theoretical papers will find a more appropriate home in Control Engineering Practice''s sister publication, Automatica. It is also expected that papers are innovative with respect to the state of the art and are sufficiently detailed for a reader to be able to duplicate the main results of the paper (supplementary material, including datasets, tables, code and any relevant interactive material can be made available and downloaded from the website). The benefits of the presented methods must be made very clear and the new techniques must be compared and contrasted with results obtained using existing methods. Moreover, a thorough analysis of failures that may happen in the design process and implementation can also be part of the paper. The scope of Control Engineering Practice matches the activities of IFAC. Papers demonstrating the contribution of automation and control in improving the performance, quality, productivity, sustainability, resource and energy efficiency, and the manageability of systems and processes for the benefit of mankind and are relevant to industrial practitioners are most welcome.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信