Investigation of the mechanical, microstructure, and durability properties of concrete with fine uniform and non-uniform polyethylene terephthalate (PET) aggregates

Abstract

Concrete manufacturing is highly resource-intensive and is a major source of greenhouse gas emission. Accelerating depletion of natural resources such as sand, which is the primary material for aggregate in concrete manufacture is a growing problem. At the same time, the disposal of vast volumes of non-biodegradable plastic waste poses a global environmental challenge. The incorporation of aggregates derived from municipal plastic waste to substitute for sand has the potential to help address both issues, while at the same time mitigating greenhouse gas emission. This study examines the potential of municipal polyethylene terephthalate (PET) plastic waste as a fine aggregate in concrete manufacturing. The primary focus was on PET aggregates with non-uniform and uniform shapes ranging in size from 2.36 to 4.75 mm. In the concrete mixtures, 0 %, 30 %, and 50 % of the fine natural aggregate by volume were replaced with fine PET aggregate with a water to cement ratio of 0.40. The obtained results showed a reduction in compressive and splitting tensile strength when compared to control specimens. However, replacing 30 % of fine natural aggregate with PET (both uniform and non-uniform shapes) significantly improved chloride resistance by 13 % and 12 %, respectively, while also enhancing the bond between cement paste and PET particles. This study characterizes the material properties of PET concrete, which represents a promising method for reusing municipal plastic waste and mitigating environmental concerns in concrete production.