Laser surface structuring of diamond-like carbon films for tribology

Abstract

The paper overviews experimental findings of the direct laser processing and surface microstructuring (texturing) of various diamond-like carbon films (a-C:H, ta-C, DLN, metal-doped DLN), aimed at improvements of their tribological and nanotribological properties. The nanosecond UV and femtosecond IR/visible pulsed lasers were applied in microprocessing of the films, focusing on high precision surface structuring with fs-laser pulses. The studies were concentrated on the following tasks: (i) surface graphitization in laser microstructuring of the films under different irradiation conditions, (ii) lubricated friction performance of DLN films micropatterned with UV ns and visible fs pulsed lasers, and (iii) nanoscale friction of laser-structured DLN and metal-doped DLN films examined with contact-mode atomic force microscopy. The important findings of our studies are related to fabrication of highly-precise microgroove/microcrater patterns on DLN films and improvements of frictional properties of the laser-structured films at the macro, micro and nanoscale. The surface microstructures improved the film properties under oil-lubricated sliding in dependence on their geometrical parameters (size, depth, period) and ambient temperature. The nanoscale friction behavior of laser-structured films was shown to be controlled by the surface graphitization, nanoscale roughness, capillary forces and wear of AFM tips during friction force imaging.