Experimental study on impact performance of seawater sea-sand concrete with recycled aggregates

Abstract

On islands distant from the mainland, obtaining raw materials for concrete production is often more challenging. To achieve sustainable development in island reef engineering, using discarded marine concrete and coral waste generated during island construction as recycled aggregates are of considerable significance. The preparation of Recycled Coral Aggregate Concrete (RCAC) for island reef engineering thus holds substantial importance. In this study, RCAC and Natural Aggregate Concrete (NAC), both designed with a compressive strength of C60, were prepared. Initially, the fundamental physical properties of the recycled coarse aggregate, such as apparent density, water absorption, and crushing index, were determined. Subsequently, a comparative analysis of the quasi-static mechanical properties of RCAC with varying proportions of recycled coral coarse aggregate (RCCA) was conducted. Furthermore, the impact compression mechanical properties of different RCAC specimens under various strain rates were examined using the Ф100mm Split Hopkinson Pressure Bar (SHPB) apparatus. The microstructure and long-term drying shrinkage performance of RCAC were also analyzed using Scanning Electron Microscopy (SEM) and a drying shrinkage apparatus. The finding indicated that the 28-day compressive strength of RCAC specimens with 100% coarse aggregate replacement reached a maximum of 62.4 MPa. The quasi-static compressive strength of RCAC specimens with 50% and 100% RCCA replacement was only 11.5% and 14.2% lower than that of NAC, respectively. Under impact loading, the dynamic compressive strength of RCAC specimens increased with the strain rate, with peak stress exhibiting an approximately linear relationship with the strain rate. The energy dissipation of RCAC specimens generally occurred in three stages, with the reflected and absorbed energies of the specimens increasing linearly with strain rate. At the same strain rate, the transmitted energy of RCAC specimens was higher than that of NAC specimens. Microstructural analysis revealed that the morphology of recycled coral aggregate is characterized by its porous and rough surface. The interfacial transition zone between the recycled coral aggregate and the cement mortar was relatively dense. Incorporating recycled coarse aggregate significantly affected the drying shrinkage properties of the concrete, with higher contents of RCCA leading to greater drying shrinkage rates.