Synthesis of concentric circular antenna array for reducing the sidelobe level by employing sine cosine optimization algorithm

IF 1.6 4区 工程技术 Q3 ENGINEERING, ELECTRICAL & ELECTRONIC
Nageswar Rao Thadikamalla, Prakasa Rao Amara
{"title":"Synthesis of concentric circular antenna array for reducing the sidelobe level by employing sine cosine optimization algorithm","authors":"Nageswar Rao Thadikamalla,&nbsp;Prakasa Rao Amara","doi":"10.1002/jnm.3272","DOIUrl":null,"url":null,"abstract":"<p>The sine cosine algorithm (SCA), a meta-heuristic optimization method, is used in this study to provide a precise linear and elliptical antenna array design for synthesizing the ideal far-field radiation pattern in the fifth-generation (5G) communication spectrum. The wireless communication system will undergo dramatic changes thanks to the forthcoming 5G technology, which offers exceptionally high data rates, increased capacity, reduced latency, and outstanding service quality. The most important component of 5G communications is an accurate antenna array design for an optimum far-field radiation pattern synthesis with a suppressed sidelobe level (SLL) value and half power beam width (HPBW). While long-distance communication necessitates a low HPBW, the entire side lobe area needs a suppressed SLL to prevent interference. The SCA is used in this case to the optimal feeding currents applied to each array member in the design examples of the concentric circular antenna arrays (CCAA) discussed in this article. It shows the litheness and attainment of the propound algorithm named SCA, chosen CCAAs with three rings and varying amounts of components or antenna array sets those are stated as follows: Set I (4, 6, 8 elements), Set II (8, 10, 12 elements), Set III (6, 12, 18 elements), Set IV (8, 14, 20 elements) with and without the center element are amalgamate. Apply the PSO, Jaya, and SCA optimization algorithms for all four Sets of antenna arrays and compare the attained results; the SLL values achieved by the SCA technique are contrasted with those of other current optimization techniques. The outcomes of all examinations reveal that the SCA algorithm achieved a superior SLL reduction over other optimization techniques.</p>","PeriodicalId":50300,"journal":{"name":"International Journal of Numerical Modelling-Electronic Networks Devices and Fields","volume":null,"pages":null},"PeriodicalIF":1.6000,"publicationDate":"2024-07-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Numerical Modelling-Electronic Networks Devices and Fields","FirstCategoryId":"5","ListUrlMain":"https://onlinelibrary.wiley.com/doi/10.1002/jnm.3272","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"ENGINEERING, ELECTRICAL & ELECTRONIC","Score":null,"Total":0}
引用次数: 0

Abstract

The sine cosine algorithm (SCA), a meta-heuristic optimization method, is used in this study to provide a precise linear and elliptical antenna array design for synthesizing the ideal far-field radiation pattern in the fifth-generation (5G) communication spectrum. The wireless communication system will undergo dramatic changes thanks to the forthcoming 5G technology, which offers exceptionally high data rates, increased capacity, reduced latency, and outstanding service quality. The most important component of 5G communications is an accurate antenna array design for an optimum far-field radiation pattern synthesis with a suppressed sidelobe level (SLL) value and half power beam width (HPBW). While long-distance communication necessitates a low HPBW, the entire side lobe area needs a suppressed SLL to prevent interference. The SCA is used in this case to the optimal feeding currents applied to each array member in the design examples of the concentric circular antenna arrays (CCAA) discussed in this article. It shows the litheness and attainment of the propound algorithm named SCA, chosen CCAAs with three rings and varying amounts of components or antenna array sets those are stated as follows: Set I (4, 6, 8 elements), Set II (8, 10, 12 elements), Set III (6, 12, 18 elements), Set IV (8, 14, 20 elements) with and without the center element are amalgamate. Apply the PSO, Jaya, and SCA optimization algorithms for all four Sets of antenna arrays and compare the attained results; the SLL values achieved by the SCA technique are contrasted with those of other current optimization techniques. The outcomes of all examinations reveal that the SCA algorithm achieved a superior SLL reduction over other optimization techniques.

利用正弦余弦优化算法合成同心圆天线阵列以降低侧叶电平
本研究采用了一种元启发式优化方法--正弦余弦算法(SCA),为合成第五代(5G)通信频谱中的理想远场辐射模式提供了精确的线性和椭圆天线阵列设计。即将到来的 5G 技术可提供极高的数据传输速率、更大的容量、更短的时延和出色的服务质量,因此无线通信系统将发生翻天覆地的变化。5G 通信最重要的组成部分是精确的天线阵列设计,以实现最佳的远场辐射模式合成,抑制侧叶水平(SLL)值和半功率波束宽度(HPBW)。远距离通信需要较低的 HPBW,而整个边叶区域则需要抑制 SLL 以防止干扰。在本文讨论的同心圆天线阵列(CCAA)设计实例中,SCA 被用于计算每个阵列成员的最佳馈电电流。本文所选的同心圆天线阵列具有三个环和不同数量的组件或天线阵列组,这些组件或阵列组如下所示,显示了所提出的名为 SCA 的算法的简便性和实现性:集合 I(4、6、8 个元件)、集合 II(8、10、12 个元件)、集合 III(6、12、18 个元件)、集合 IV(8、14、20 个元件)中有中心元件和无中心元件的组合。将 PSO、Jaya 和 SCA 优化算法应用于所有四组天线阵列,并比较所获得的结果;将 SCA 技术获得的 SLL 值与其他现有优化技术的 SLL 值进行对比。所有检查结果都表明,SCA 算法比其他优化技术更能降低 SLL。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
CiteScore
4.60
自引率
6.20%
发文量
101
审稿时长
>12 weeks
期刊介绍: Prediction through modelling forms the basis of engineering design. The computational power at the fingertips of the professional engineer is increasing enormously and techniques for computer simulation are changing rapidly. Engineers need models which relate to their design area and which are adaptable to new design concepts. They also need efficient and friendly ways of presenting, viewing and transmitting the data associated with their models. The International Journal of Numerical Modelling: Electronic Networks, Devices and Fields provides a communication vehicle for numerical modelling methods and data preparation methods associated with electrical and electronic circuits and fields. It concentrates on numerical modelling rather than abstract numerical mathematics. Contributions on numerical modelling will cover the entire subject of electrical and electronic engineering. They will range from electrical distribution networks to integrated circuits on VLSI design, and from static electric and magnetic fields through microwaves to optical design. They will also include the use of electrical networks as a modelling medium.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信