Foam-Assisted Hydrocarbon Gas Injection in Oil-Wet Fractured Carbonate: In Situ Investigation of Fracture–Matrix Interactions

Abstract

The success of foam-induced flow diversion in fractured carbonates hinges on proper injection strategies, requiring an in-depth understanding of the factors responsible for stimulating fracture–matrix interactions. In this study, we present a novel investigation of the interactions between the fracture and the matrix influenced by the mobility control effect during CH₄-foam injections. These interactions were probed at the pore scale using a three-phase flow system integrated with a high-resolution micro-CT scanner. In situ phase saturations were monitored and quantified to interpret the resulting fluid transport at various injection parameters. At the initial stage of foam injection, the surfactant solution was able to invade the matrix leading to water/oil displacement events, however, impeding gas penetration. Increasing total injection velocity produced higher in situ foam quality in the fracture than the injected quality, where significant fraction of the surfactant solution from the foam was primarily diverted into the matrix. A pronounced increase in the average gas saturation within the matrix was only observed at the highest injection velocity. The pore-scale evidence showed the occurrence of combined displacement processes (water/oil, gas/oil, gas/oil/water) in the matrix, attributed to the established mobility control in the fracture, which contributed to the diversion of surfactant solution and gas to the matrix. Lastly, the injection–soaking–production technique effectively mobilized the residual oil after a long injection process of CH₄-foam. At this stage, the surfactant solution was no longer playing a role as the primary invading fluid; rather, it was the diverted gas that led to the increase in the matrix-oil production.