{"title":"Remarkable photodegradation breakdown cost, antimicrobial activity, photocatalytic efficiency, and recycling of SnO2 quantum dots throughout industrial hazardous pollutants treatment","authors":"","doi":"10.1016/j.ceramint.2024.07.004","DOIUrl":null,"url":null,"abstract":"<div><p><span><span>In the conducted research, a one-step hydrothermal synthesis of </span>pure<span><span> and titanium-doped tin dioxide<span><span> quantum dots is elaborated upon, with a thorough analysis of their structural, optical, morphological, and </span>photocatalytic properties undertaken using advanced analytical techniques. Through X-ray Diffraction XRD, the crystalline nature and phase purity of the tetragonal structures of SnDs were confirmed, with the </span></span>crystallite sizes measured at 3.0 nm for SnD1 and 7.66 nm for SnD2, following treatments at 240 °C and 300 °C, respectively. The structural integrity of SnO</span></span><sub>2</sub><span><span> was maintained despite titanium doping. FTIR spectroscopy verified the existence of specific vibrational modes indicative of surface </span>hydroxyl groups<span><span>. HRTEM images revealed the spherical morphology of particles, with diameters of 3.5 nm for SnD1 and 9.1 nm for SnD2. Optical band gaps, determined through UV-DRS, ranged from 3.33 eV in SnD1 to 3.47 eV in SnDTi2. The photocatalytic degradation of Congo Red dye under </span>xenon<span> lamp irradiation was quantitatively assessed; notably, SnD1 exhibited a 23 % higher rate constant compared to SnD2, attributed to its smaller particle size and a 31 % greater surface area. Doping with 4 % Ti in Sn</span></span></span><sub>0.96</sub>Ti<sub>0.04</sub>O<sub>2</sub><span> more than doubled the degradation rate compared to a 6 % Ti doping in Sn</span><sub>0.94</sub>Ti<sub>0.06</sub>O<sub>2</sub><span><span>. Furthermore, the generation of hydroxyl radicals was significantly enhanced, showing an increase of approximately 220 % for SnD1 and 80 % for SnD2. The capability of these </span>nanomaterials<span><span><span> to reduce the chemical oxygen demand of industrial </span>organic pollutants to within regulatory limits under </span>solar irradiation<span><span> was documented, with SnD1 maintaining its photocatalytic efficiency over seven cycles of reuse. In the photocatalytic degradation rate of Congo Red dye, which was 23 % higher for SnD1 compared to SnD2, and the threefold increase in the degradation rate for SnDTi1 compared to SnDTi2. An economic assessment, based on electricity tariffs in Saudi Arabia, highlighted the cost-effectiveness of SnD1, which ranged from 26.93 to 30.36 USD per breakdown cost of the </span>photodegradation process, showing it to be less costly than SnD2. Conversely, SnDTi1 was found to be more economical than SnDTi2, with costs ranging from 26.67 to 33.09 USD. Collectively, the results emphasize the outstanding photocatalytic performance and cost-efficiency of SnDs, reinforcing their potential as sustainable solutions for the treatment of industrial wastewater. Additionally, the antibacterial efficacy of these materials against a range of bacteria, yeast, and fungi was investigated and substantiated.</span></span></span></p></div>","PeriodicalId":267,"journal":{"name":"Ceramics International","volume":null,"pages":null},"PeriodicalIF":5.1000,"publicationDate":"2024-07-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Ceramics International","FirstCategoryId":"88","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0272884224028797","RegionNum":2,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"MATERIALS SCIENCE, CERAMICS","Score":null,"Total":0}
引用次数: 0
Abstract
In the conducted research, a one-step hydrothermal synthesis of pure and titanium-doped tin dioxide quantum dots is elaborated upon, with a thorough analysis of their structural, optical, morphological, and photocatalytic properties undertaken using advanced analytical techniques. Through X-ray Diffraction XRD, the crystalline nature and phase purity of the tetragonal structures of SnDs were confirmed, with the crystallite sizes measured at 3.0 nm for SnD1 and 7.66 nm for SnD2, following treatments at 240 °C and 300 °C, respectively. The structural integrity of SnO2 was maintained despite titanium doping. FTIR spectroscopy verified the existence of specific vibrational modes indicative of surface hydroxyl groups. HRTEM images revealed the spherical morphology of particles, with diameters of 3.5 nm for SnD1 and 9.1 nm for SnD2. Optical band gaps, determined through UV-DRS, ranged from 3.33 eV in SnD1 to 3.47 eV in SnDTi2. The photocatalytic degradation of Congo Red dye under xenon lamp irradiation was quantitatively assessed; notably, SnD1 exhibited a 23 % higher rate constant compared to SnD2, attributed to its smaller particle size and a 31 % greater surface area. Doping with 4 % Ti in Sn0.96Ti0.04O2 more than doubled the degradation rate compared to a 6 % Ti doping in Sn0.94Ti0.06O2. Furthermore, the generation of hydroxyl radicals was significantly enhanced, showing an increase of approximately 220 % for SnD1 and 80 % for SnD2. The capability of these nanomaterials to reduce the chemical oxygen demand of industrial organic pollutants to within regulatory limits under solar irradiation was documented, with SnD1 maintaining its photocatalytic efficiency over seven cycles of reuse. In the photocatalytic degradation rate of Congo Red dye, which was 23 % higher for SnD1 compared to SnD2, and the threefold increase in the degradation rate for SnDTi1 compared to SnDTi2. An economic assessment, based on electricity tariffs in Saudi Arabia, highlighted the cost-effectiveness of SnD1, which ranged from 26.93 to 30.36 USD per breakdown cost of the photodegradation process, showing it to be less costly than SnD2. Conversely, SnDTi1 was found to be more economical than SnDTi2, with costs ranging from 26.67 to 33.09 USD. Collectively, the results emphasize the outstanding photocatalytic performance and cost-efficiency of SnDs, reinforcing their potential as sustainable solutions for the treatment of industrial wastewater. Additionally, the antibacterial efficacy of these materials against a range of bacteria, yeast, and fungi was investigated and substantiated.
期刊介绍:
Ceramics International covers the science of advanced ceramic materials. The journal encourages contributions that demonstrate how an understanding of the basic chemical and physical phenomena may direct materials design and stimulate ideas for new or improved processing techniques, in order to obtain materials with desired structural features and properties.
Ceramics International covers oxide and non-oxide ceramics, functional glasses, glass ceramics, amorphous inorganic non-metallic materials (and their combinations with metal and organic materials), in the form of particulates, dense or porous bodies, thin/thick films and laminated, graded and composite structures. Process related topics such as ceramic-ceramic joints or joining ceramics with dissimilar materials, as well as surface finishing and conditioning are also covered. Besides traditional processing techniques, manufacturing routes of interest include innovative procedures benefiting from externally applied stresses, electromagnetic fields and energetic beams, as well as top-down and self-assembly nanotechnology approaches. In addition, the journal welcomes submissions on bio-inspired and bio-enabled materials designs, experimentally validated multi scale modelling and simulation for materials design, and the use of the most advanced chemical and physical characterization techniques of structure, properties and behaviour.
Technologically relevant low-dimensional systems are a particular focus of Ceramics International. These include 0, 1 and 2-D nanomaterials (also covering CNTs, graphene and related materials, and diamond-like carbons), their nanocomposites, as well as nano-hybrids and hierarchical multifunctional nanostructures that might integrate molecular, biological and electronic components.