Integration of urban aerial cable cars into public transit: Operational capacity limits due to passenger queuing at stations

Abstract

As the airspace is increasingly gaining importance as a new frontier to improve urban mobility, aerial cable cars are being discussed and already appropriately implemented worldwide to supplement conventional modes of transport in urban areas. Transit planners and designers should carefully consider the interoperability and integration of cable car services with conventional modes of transport. In particular, excessive delays and overcrowding conditions due to deficits in interoperability should be avoided. This challenge of interoperability arises as conventional modes of transport operate predominantly on a timetable, and most cable car technologies operate in such close headways that they can be considered as almost continuous conveyors. The advantage of having almost always a transport vessel of a cable car ready for boarding ceases when large volumes of passengers arrive in batches, for example from higher-capacity modes of transport or at large events, resulting in long queues. Traditional manuals do not yet reflect these aspects of interoperability adequately. Consequently, this work filled this research gap about the interoperability of cable cars related to handling high volumes of incoming passenger arrivals that transfer in larger batches from feeder modes and often result in queues at cable car stations. The following objectives were targeted: (1) determine passenger capacity limits of conventional modes of transport acting as feeders to cable cars and (2) specify space requirements to be provided due to the potential queues that arise. To answer these, methods of Queuing Theory were used and results were placed in Levels of Services of traditional manuals. Key performance indicators included queue length, waiting time, and corresponding queue space. The results revealed that cable cars can be a useful complement to public transit but are of limited feasibility due to cumulative queues at arrival rates with larger crowds. High-capacity feeder modes (e.g., commuter rails) are limited to 20-minute headways depending on cable car technologies. Further, queuing areas of up to 1000 square meters (around 10,800 ft²) should be considered. Several operational limitations are presented as guidance for practitioners and policymakers.