{"title":"Rope–sheave contact transient analysis in hoisting operations with a bristle model and an arbitrary Lagrangian–Eulerian approach","authors":"José L. Escalona","doi":"10.1007/s11044-024-10000-w","DOIUrl":null,"url":null,"abstract":"<p>This paper describes the development of a computational model for the rope–sheave contact interaction in reeving systems when the ropes are modeled with an arbitrary Lagrangian–Eulerian approach. This discretization approach has been developed in previous publications as a general and systematic method for the modeling and simulation of reeving systems. However, the rope–sheave contact model was avoided assuming the no-slip contact condition. The contact model developed in this paper introduces specialized ALE-ANCF-cubic rope contact elements that are used to discretize the rope segment winded at the sheave. The contact is modeled using a set of virtual discrete bristles attached to material points in the mid-line of the rope in one end and in contact with the sheave in the other end. Therefore, a second Lagrangian mesh, apart of the ALE mesh used to discretize the rope, is used to define the fixed ends of the bristles. The kinematics and dynamics used to calculate the normal and tangential contact forces are described in detail. The contact model is 3D and can be used to analyze the contact with a sheave groove with arbitrary shape. The tangential contact force model can be used to describe stick and slip contact conditions and, to improve the simulation performance of the model, an LuGre regularization tangential contact force model is used. The rope-sheave contact model is used to analyze the behavior of a simple elevator system. The numerical results show that the static rope-sheave contact interaction agrees well with an analytical solution of the problem. Finally, the same elevator system is analyzed dynamically for a cabin ride of 8 meters with a steady velocity of 1 m/s. Results show that the normal and tangential contact forces during the steady velocity period are not so different from the static solution, but very different from the classical Creep Theory and Firbank’s Theory.</p>","PeriodicalId":49792,"journal":{"name":"Multibody System Dynamics","volume":"75 1","pages":""},"PeriodicalIF":2.6000,"publicationDate":"2024-06-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Multibody System Dynamics","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.1007/s11044-024-10000-w","RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"MECHANICS","Score":null,"Total":0}
引用次数: 0
Abstract
This paper describes the development of a computational model for the rope–sheave contact interaction in reeving systems when the ropes are modeled with an arbitrary Lagrangian–Eulerian approach. This discretization approach has been developed in previous publications as a general and systematic method for the modeling and simulation of reeving systems. However, the rope–sheave contact model was avoided assuming the no-slip contact condition. The contact model developed in this paper introduces specialized ALE-ANCF-cubic rope contact elements that are used to discretize the rope segment winded at the sheave. The contact is modeled using a set of virtual discrete bristles attached to material points in the mid-line of the rope in one end and in contact with the sheave in the other end. Therefore, a second Lagrangian mesh, apart of the ALE mesh used to discretize the rope, is used to define the fixed ends of the bristles. The kinematics and dynamics used to calculate the normal and tangential contact forces are described in detail. The contact model is 3D and can be used to analyze the contact with a sheave groove with arbitrary shape. The tangential contact force model can be used to describe stick and slip contact conditions and, to improve the simulation performance of the model, an LuGre regularization tangential contact force model is used. The rope-sheave contact model is used to analyze the behavior of a simple elevator system. The numerical results show that the static rope-sheave contact interaction agrees well with an analytical solution of the problem. Finally, the same elevator system is analyzed dynamically for a cabin ride of 8 meters with a steady velocity of 1 m/s. Results show that the normal and tangential contact forces during the steady velocity period are not so different from the static solution, but very different from the classical Creep Theory and Firbank’s Theory.
期刊介绍:
The journal Multibody System Dynamics treats theoretical and computational methods in rigid and flexible multibody systems, their application, and the experimental procedures used to validate the theoretical foundations.
The research reported addresses computational and experimental aspects and their application to classical and emerging fields in science and technology. Both development and application aspects of multibody dynamics are relevant, in particular in the fields of control, optimization, real-time simulation, parallel computation, workspace and path planning, reliability, and durability. The journal also publishes articles covering application fields such as vehicle dynamics, aerospace technology, robotics and mechatronics, machine dynamics, crashworthiness, biomechanics, artificial intelligence, and system identification if they involve or contribute to the field of Multibody System Dynamics.