Vitor E. Pinotti , Angelo F. Andreoli , Mayumi A. Nakahashi , Mário Boccalini Jr. , Fernando J.G. Landgraf , Piter Gargarella
{"title":"High‑silicon electrical steel powders aimed for additive manufacturing","authors":"Vitor E. Pinotti , Angelo F. Andreoli , Mayumi A. Nakahashi , Mário Boccalini Jr. , Fernando J.G. Landgraf , Piter Gargarella","doi":"10.1016/j.powtec.2024.119986","DOIUrl":null,"url":null,"abstract":"<div><p>The Fe6.5Si soft magnetic alloy exhibits promising magnetic properties for energy applications, including near-zero magnetostriction, low magnetocrystalline anisotropy, and higher electrical resistivity than conventional electrical steels. However, its brittleness impedes industrial use. Recent advances in powder-based additive manufacturing show potential for processing high‑silicon electrical steels. This study focuses on the production cycle and properties of feedstock powder, which are crucial for such applications. Fe6.5Si alloy powders were produced via closed-coupled gas atomization. Comprehensive analysis covered mass balance, particle size distribution, powder flow, morphology, density, rheological properties, and thermal and magnetic behavior. Results suggest the feasibility of producing suitable Fe6.5Si alloy powder via gas atomization, enabling additive manufacturing of the next generation of medium/high-frequency electrical motors. The powder exhibited desirable characteristics within the size ranges applicable to laser powder bed fusion (20–75 μm) and direct energy deposition (75–106 μm), showing excellent flow behavior and morphological suitability for additive manufacturing.</p></div>","PeriodicalId":407,"journal":{"name":"Powder Technology","volume":null,"pages":null},"PeriodicalIF":4.5000,"publicationDate":"2024-06-08","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Powder Technology","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0032591024006296","RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"ENGINEERING, CHEMICAL","Score":null,"Total":0}
引用次数: 0
Abstract
The Fe6.5Si soft magnetic alloy exhibits promising magnetic properties for energy applications, including near-zero magnetostriction, low magnetocrystalline anisotropy, and higher electrical resistivity than conventional electrical steels. However, its brittleness impedes industrial use. Recent advances in powder-based additive manufacturing show potential for processing high‑silicon electrical steels. This study focuses on the production cycle and properties of feedstock powder, which are crucial for such applications. Fe6.5Si alloy powders were produced via closed-coupled gas atomization. Comprehensive analysis covered mass balance, particle size distribution, powder flow, morphology, density, rheological properties, and thermal and magnetic behavior. Results suggest the feasibility of producing suitable Fe6.5Si alloy powder via gas atomization, enabling additive manufacturing of the next generation of medium/high-frequency electrical motors. The powder exhibited desirable characteristics within the size ranges applicable to laser powder bed fusion (20–75 μm) and direct energy deposition (75–106 μm), showing excellent flow behavior and morphological suitability for additive manufacturing.
期刊介绍:
Powder Technology is an International Journal on the Science and Technology of Wet and Dry Particulate Systems. Powder Technology publishes papers on all aspects of the formation of particles and their characterisation and on the study of systems containing particulate solids. No limitation is imposed on the size of the particles, which may range from nanometre scale, as in pigments or aerosols, to that of mined or quarried materials. The following list of topics is not intended to be comprehensive, but rather to indicate typical subjects which fall within the scope of the journal's interests:
Formation and synthesis of particles by precipitation and other methods.
Modification of particles by agglomeration, coating, comminution and attrition.
Characterisation of the size, shape, surface area, pore structure and strength of particles and agglomerates (including the origins and effects of inter particle forces).
Packing, failure, flow and permeability of assemblies of particles.
Particle-particle interactions and suspension rheology.
Handling and processing operations such as slurry flow, fluidization, pneumatic conveying.
Interactions between particles and their environment, including delivery of particulate products to the body.
Applications of particle technology in production of pharmaceuticals, chemicals, foods, pigments, structural, and functional materials and in environmental and energy related matters.
For materials-oriented contributions we are looking for articles revealing the effect of particle/powder characteristics (size, morphology and composition, in that order) on material performance or functionality and, ideally, comparison to any industrial standard.