Coal tar-pitch derived porous carbons with zinc oxide nanoparticles as a dual-functional template and activating agent for high-performance supercapacitors

IF 2.5 4区 材料科学 Q2 CHEMISTRY, APPLIED
Zaheer Abbas, Jai Kumar, Razium Ali Soomro, Ning Sun, Zhaoxin Yu, Bin Xu
{"title":"Coal tar-pitch derived porous carbons with zinc oxide nanoparticles as a dual-functional template and activating agent for high-performance supercapacitors","authors":"Zaheer Abbas, Jai Kumar, Razium Ali Soomro, Ning Sun, Zhaoxin Yu, Bin Xu","doi":"10.1007/s10934-024-01629-1","DOIUrl":null,"url":null,"abstract":"<p>The development of advanced carbon materials is indispensable for high-performance supercapacitors. Herein, we report the direct pyrolysis of waste coal-tar pitch (CTP) with ZnO nanoparticles (Zn NPs) to produce hierarchical porous carbon materials (HPCs). The CTP served as a carbon source, and the embedded ZnO NPs as a simultaneous templating and activating agent for HPCs. At an optimum temperature of 800 °C, the produced HPCs (HPC-800) realized an optimal specific surface area (1267 m<sup>2</sup> g<sup>-1</sup>) and pore volume of 1.71 cm<sup>3</sup> g<sup>-1</sup>, enabling the devised capacitor to exhibit a specific capacitance of 172 F g<sup>-1</sup> at a current density of 0.1 A g<sup>-1</sup> in 6 M KOH electrolyte and a capacitance retention of 81% (0.1–30 A g<sup>-1</sup>). The as-symmetrical device could deliver an energy density of 8.3 Wh∙kg<sup>-1</sup> at a high-power density of 50.0 W∙kg<sup>-1</sup> and retained energy density of 4.9 Wh∙kg<sup>-1</sup> at a power density of 11.9 kW∙kg<sup>-1</sup>.</p>","PeriodicalId":660,"journal":{"name":"Journal of Porous Materials","volume":null,"pages":null},"PeriodicalIF":2.5000,"publicationDate":"2024-05-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Porous Materials","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.1007/s10934-024-01629-1","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"CHEMISTRY, APPLIED","Score":null,"Total":0}
引用次数: 0

Abstract

The development of advanced carbon materials is indispensable for high-performance supercapacitors. Herein, we report the direct pyrolysis of waste coal-tar pitch (CTP) with ZnO nanoparticles (Zn NPs) to produce hierarchical porous carbon materials (HPCs). The CTP served as a carbon source, and the embedded ZnO NPs as a simultaneous templating and activating agent for HPCs. At an optimum temperature of 800 °C, the produced HPCs (HPC-800) realized an optimal specific surface area (1267 m2 g-1) and pore volume of 1.71 cm3 g-1, enabling the devised capacitor to exhibit a specific capacitance of 172 F g-1 at a current density of 0.1 A g-1 in 6 M KOH electrolyte and a capacitance retention of 81% (0.1–30 A g-1). The as-symmetrical device could deliver an energy density of 8.3 Wh∙kg-1 at a high-power density of 50.0 W∙kg-1 and retained energy density of 4.9 Wh∙kg-1 at a power density of 11.9 kW∙kg-1.

Abstract Image

含有纳米氧化锌颗粒的煤焦油沥青衍生多孔碳作为高性能超级电容器的双功能模板和活化剂
高性能超级电容器离不开先进碳材料的开发。在此,我们报告了直接热解废煤焦油沥青(CTP)与氧化锌纳米颗粒(Zn NPs)以制备分层多孔碳材料(HPCs)的方法。CTP 可作为碳源,嵌入的 ZnO NPs 可同时作为 HPCs 的模板和活化剂。在 800 ℃ 的最佳温度下,制得的 HPC(HPC-800)实现了最佳比表面积(1267 m2 g-1)和 1.71 cm3 g-1 的孔体积,使设计出的电容器在 6 M KOH 电解液中的电流密度为 0.1 A g-1 时显示出 172 F g-1 的比电容和 81% 的电容保持率(0.1-30 A g-1)。该非对称器件在 50.0 W∙kg-1 的高功率密度下可提供 8.3 Wh∙kg-1 的能量密度,在 11.9 kW∙kg-1 的功率密度下可保留 4.9 Wh∙kg-1 的能量密度。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
Journal of Porous Materials
Journal of Porous Materials 工程技术-材料科学:综合
CiteScore
4.80
自引率
7.70%
发文量
203
审稿时长
2.6 months
期刊介绍: The Journal of Porous Materials is an interdisciplinary and international periodical devoted to all types of porous materials. Its aim is the rapid publication of high quality, peer-reviewed papers focused on the synthesis, processing, characterization and property evaluation of all porous materials. The objective is to establish a unique journal that will serve as a principal means of communication for the growing interdisciplinary field of porous materials. Porous materials include microporous materials with 50 nm pores. Examples of microporous materials are natural and synthetic molecular sieves, cationic and anionic clays, pillared clays, tobermorites, pillared Zr and Ti phosphates, spherosilicates, carbons, porous polymers, xerogels, etc. Mesoporous materials include synthetic molecular sieves, xerogels, aerogels, glasses, glass ceramics, porous polymers, etc.; while macroporous materials include ceramics, glass ceramics, porous polymers, aerogels, cement, etc. The porous materials can be crystalline, semicrystalline or noncrystalline, or combinations thereof. They can also be either organic, inorganic, or their composites. The overall objective of the journal is the establishment of one main forum covering the basic and applied aspects of all porous materials.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信