Intrinsic Wetting of TC4 by Ag, AgCu and AgCuTi Alloys

IF 3.3 3区材料科学 Q2 MATERIALS SCIENCE, MULTIDISCIPLINARY

Metals and Materials International Pub Date : 2024-05-11 DOI:10.1007/s12540-024-01685-x

Kaibin Xie, Ran Sui, Zixu Zuo, Qiaoli Lin

引用次数: 0

Abstract

Intrinsic wetting behaviors of Ag, AgCu and AgCuTi on TC4 were studied by ISD and MSD method. A linear spreading was found in Ag/TC4 system with a rate of ~ 0.14 mm/s. No significant difference in wetting behavior between AgCu/TC4 and AgCuTi/TC4, which can be divided into three stages. The first stage is controlled by the dissolution process at the solid/liquid interface, and the second and third stages are characterized by near linear and linear spreading. The corresponding spreading rates are ~ 0.017 mm/s and ~ 0.004 mm/s, which may be controlled by the solid solution reactions of Cu and TC4 and Ag and TC4, respectively.

Graphical Abstract

Abstract Image

查看原文本刊更多论文

银、银铜和银铜钛合金对 TC4 的内在润湿性

采用 ISD 和 MSD 方法研究了 Ag、AgCu 和 AgCuTi 在 TC4 上的内在润湿行为。在 Ag/TC4 系统中发现了线性铺展，铺展速度约为 0.14 mm/s。AgCu/TC4 和 AgCuTi/TC4 的润湿行为无明显差异，可分为三个阶段。第一阶段由固/液界面的溶解过程控制，第二和第三阶段的特点是近似线性和线性铺展。相应的铺展速率分别为 ~ 0.017 mm/s 和 ~ 0.004 mm/s，可能分别由铜和 TC4 以及银和 TC4 的固溶反应控制。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Metals and Materials International 工程技术-材料科学：综合

CiteScore

7.10

自引率

8.60%

发文量

197

审稿时长

3.7 months

期刊介绍： Metals and Materials International publishes original papers and occasional critical reviews on all aspects of research and technology in materials engineering: physical metallurgy, materials science, and processing of metals and other materials. Emphasis is placed on those aspects of the science of materials that are concerned with the relationships among the processing, structure and properties (mechanical, chemical, electrical, electrochemical, magnetic and optical) of materials. Aspects of processing include the melting, casting, and fabrication with the thermodynamics, kinetics and modeling.