Post-combustion carbon capture process modeling, simulation, and assessment of synergistic effect of solvents

Abstract

Post-combustion carbon capture appears to be a promising solution to reduce the emission of carbon dioxide (CO₂) from power plants that generate electricity using either coal or natural gas. In addition, carbon capture process efficiency, capacity, and energy consumption have become challenging against the performance of the capture process. However, synergistic effect due to solvents blend has gained attention to reduce the process energy consumption and enhance process efficiency. In this study, blends of methyldiethanolamine (MDEA) and piperazine (PZ) at different concentrations were investigated using a validated post-combustion capture process model using Aspen HYSYS. Results were compared with 30 wt% monoethanolamine (MEA) as reference case. The effective process variables are concentration of solvents, the amount of water and solvent in the makeup section, viscosity of solvent, energy consumed in different process stages, and the amount of lean solvent flow rate. These variables were studied against fixed process variables using rate-based model. The study shows that using (43 wt% MDEA/7 wt% PZ) for post-combustion carbon capture needs 2.53 MJ/kg_CO2 regeneration energy for 88.5% process efficiency compared to 4.003 MJ/kgco₂ for 30 wt% MEA without the need for any process modifications. In addition, it was found that solvents synergistic effect contributes to resolving the drawbacks of post-combustion capture that will enable the high utilization of the process and contribution to reduce the consequences effect of climate change. Therefore, the study will help policymakers, industries and encourage researchers towards the large-scale commissioning of blended solvent -based post-combustion capture process.