{"title":"Innovative Wedge Anchorage for CFRP Plates: Development and Testing","authors":"Mustafa Alhusain, Adil Al-Mayah","doi":"10.3390/jcs8030103","DOIUrl":null,"url":null,"abstract":"Gripping prestressed carbon fiber-reinforced polymers (CFRPs) in structural strengthening applications is challenging due to CFRPs’ susceptibility to lateral loading. This paper presents a reliable and reusable wedge anchorage for gripping CFRP plates that are 50 mm wide and 1.2 mm thick. The cylindrical anchorage, which is 75 mm long and 76.2 mm in diameter, consists of an external steel barrel, two internal steel wedges, and two soft copper sleeves. The barrel-wedge interface is designed using an innovative arc–linear configuration, through which the desired stress distribution is attained, preventing stress concentration and the premature failure of the CFRP plate. The wedge anchorage was experimentally tested by applying a displacement-controlled tensile load of 0.6 mm/min until the complete fracture of the CFRP plate. The anchorage’s performance was examined under distinct installation conditions by applying different presetting levels: high (40–120 kN) and low (hammering) presetting. It was observed that the anchorage successfully prevented CFRP premature failure in all tests by achieving an average tensile loading of 172.3 (±5.7) kN, exceeding its reported tensile strength of 168 kN (2800 MPa). Minor CFRP displacements of 6.26 (±0.75) mm and 3.33 (±0.16) mm were recorded under low and high presetting levels, respectively. Similarly, the CFRP slippage relative to the wedges for the low and high presetting tests was only 1.18 (±0.75) mm and 0.33 (±0.15) mm, respectively. Also, only minor scratches were observed in the wedge–barrel interface, indicating the absence of extensive plastic deformation.","PeriodicalId":3,"journal":{"name":"ACS Applied Electronic Materials","volume":"15 9","pages":""},"PeriodicalIF":4.3000,"publicationDate":"2024-03-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"ACS Applied Electronic Materials","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.3390/jcs8030103","RegionNum":3,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ENGINEERING, ELECTRICAL & ELECTRONIC","Score":null,"Total":0}
引用次数: 0
Abstract
Gripping prestressed carbon fiber-reinforced polymers (CFRPs) in structural strengthening applications is challenging due to CFRPs’ susceptibility to lateral loading. This paper presents a reliable and reusable wedge anchorage for gripping CFRP plates that are 50 mm wide and 1.2 mm thick. The cylindrical anchorage, which is 75 mm long and 76.2 mm in diameter, consists of an external steel barrel, two internal steel wedges, and two soft copper sleeves. The barrel-wedge interface is designed using an innovative arc–linear configuration, through which the desired stress distribution is attained, preventing stress concentration and the premature failure of the CFRP plate. The wedge anchorage was experimentally tested by applying a displacement-controlled tensile load of 0.6 mm/min until the complete fracture of the CFRP plate. The anchorage’s performance was examined under distinct installation conditions by applying different presetting levels: high (40–120 kN) and low (hammering) presetting. It was observed that the anchorage successfully prevented CFRP premature failure in all tests by achieving an average tensile loading of 172.3 (±5.7) kN, exceeding its reported tensile strength of 168 kN (2800 MPa). Minor CFRP displacements of 6.26 (±0.75) mm and 3.33 (±0.16) mm were recorded under low and high presetting levels, respectively. Similarly, the CFRP slippage relative to the wedges for the low and high presetting tests was only 1.18 (±0.75) mm and 0.33 (±0.15) mm, respectively. Also, only minor scratches were observed in the wedge–barrel interface, indicating the absence of extensive plastic deformation.
期刊介绍:
ACS Applied Electronic Materials is an interdisciplinary journal publishing original research covering all aspects of electronic materials. The journal is devoted to reports of new and original experimental and theoretical research of an applied nature that integrate knowledge in the areas of materials science, engineering, optics, physics, and chemistry into important applications of electronic materials. Sample research topics that span the journal's scope are inorganic, organic, ionic and polymeric materials with properties that include conducting, semiconducting, superconducting, insulating, dielectric, magnetic, optoelectronic, piezoelectric, ferroelectric and thermoelectric.
Indexed/Abstracted:
Web of Science SCIE
Scopus
CAS
INSPEC
Portico