Local Heat Transfer Distribution On Thin Metal Foil Impinged by Array of Free Surface Jets

Abstract

The present study focuses on the measurement of the local heat transfer distribution of a smooth flat plate impinged by an array of free surface jets on a thin metal foil. Local Nusselt number distributions are measured for a fixed jet diameter (d = 3 mm). The jet arrays consist of perfectly round apertures arranged in a square pattern, with a uniform spacing of 4d between adjacent jets in both the streamwise and spanwise direction. A wide range of Reynolds numbers varying from 1000 to 12500 are covered in this study. The nozzle to plate spacing (z/d) is varied between 1 to 10. The effect of the Reynolds number and nozzle to plate spacing on the local and spanwise average Nusselt number distributions are studied. The local Nusselt number exhibits an increase with nozzle-to-plate spacing within the low Reynolds number range (Re = 1000 to 2500). However, for Reynolds numbers exceeding 2500, the influence of nozzle-to-plate spacing on Nusselt number distributions remains negligible up to a nozzle-to-plate distance (z/d) of 5. Beyond this point, there is a gradual decrease in the Nusselt number value. The Nusselt number value gradually decreases beyond z/d of 5. At a Reynolds number of 1500, the Nusselt number increases by 71% for z/d = 10 in comparison to z/d = 1. Empirical correlations for local and spanwise average Nusselt number are proposed which satisfactory predict the local as well as spanwise average Nusselt number distributions.