Effects of Gamma Irradiation on the AC Electrical Properties of Cross-Linked Epoxy Resin/Bisphenol A-Based Polycarbonate Composites

IF 3 Q2 MATERIALS SCIENCE, COMPOSITES
Ziad Alqudah, Hassan K. Juwhari, Z. Elimat
{"title":"Effects of Gamma Irradiation on the AC Electrical Properties of Cross-Linked Epoxy Resin/Bisphenol A-Based Polycarbonate Composites","authors":"Ziad Alqudah, Hassan K. Juwhari, Z. Elimat","doi":"10.3390/jcs7120503","DOIUrl":null,"url":null,"abstract":"The effects of gamma radiation on the AC electrical properties of highly cross-linked epoxy resin/bisphenol A-based polycarbonate samples have been investigated as a function of concentrations of bisphenol A-based polycarbonate, frequency, and temperature. The composite samples contained different bisphenol A-based polycarbonate concentrations of 0, 4, 8, 10, and 15 by wt%. The gamma irradiation process was performed at different gamma doses of 0, 100, 300, and 500 Gy. The AC electrical properties of the tested samples were studied before and after gamma irradiation within a frequency range of 200 kHz to 1 MHz. The results show that after irradiation, a consistent decrease in complex impedance values (Z∗) was observed, indicating an increase in conductivity due to radiation-induced scission of the composite structure. Dielectric properties, including the dielectric constant (εr) and dielectric loss (εi), exhibited an increase with higher doses and higher polycarbonate concentrations, signifying the formation of defect sites and charge carrier trapping. AC electrical conductivity (σac) displayed a notable rise post irradiation, with temperatures ranging from 30 °C to 110 °C, and higher radiation doses and higher temperatures led to increased conductivity. The activation energy ( Ea) decreased as the radiation dose increased, reflecting structural modifications induced by radiation.","PeriodicalId":15435,"journal":{"name":"Journal of Composites Science","volume":"100 6","pages":""},"PeriodicalIF":3.0000,"publicationDate":"2023-12-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Composites Science","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.3390/jcs7120503","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"MATERIALS SCIENCE, COMPOSITES","Score":null,"Total":0}
引用次数: 0

Abstract

The effects of gamma radiation on the AC electrical properties of highly cross-linked epoxy resin/bisphenol A-based polycarbonate samples have been investigated as a function of concentrations of bisphenol A-based polycarbonate, frequency, and temperature. The composite samples contained different bisphenol A-based polycarbonate concentrations of 0, 4, 8, 10, and 15 by wt%. The gamma irradiation process was performed at different gamma doses of 0, 100, 300, and 500 Gy. The AC electrical properties of the tested samples were studied before and after gamma irradiation within a frequency range of 200 kHz to 1 MHz. The results show that after irradiation, a consistent decrease in complex impedance values (Z∗) was observed, indicating an increase in conductivity due to radiation-induced scission of the composite structure. Dielectric properties, including the dielectric constant (εr) and dielectric loss (εi), exhibited an increase with higher doses and higher polycarbonate concentrations, signifying the formation of defect sites and charge carrier trapping. AC electrical conductivity (σac) displayed a notable rise post irradiation, with temperatures ranging from 30 °C to 110 °C, and higher radiation doses and higher temperatures led to increased conductivity. The activation energy ( Ea) decreased as the radiation dose increased, reflecting structural modifications induced by radiation.
伽马辐照对交联环氧树脂/双酚 A 基聚碳酸酯复合材料交流电特性的影响
研究了伽马辐射对高交联环氧树脂/双酚基聚碳酸酯样品交流电学性能的影响,并将其作为双酚基聚碳酸酯浓度、频率和温度的函数。复合样品含有不同的双酚基聚碳酸酯浓度,分别为0、4、8、10和15%。辐照过程以0、100、300和500戈瑞的不同剂量进行。在200 kHz至1 MHz的频率范围内,研究了辐照前后样品的交流电学特性。结果表明,辐照后复合材料的复合阻抗值(Z *)持续下降,表明复合材料的电导率因辐照引起的结构断裂而增加。随着剂量和聚碳酸酯浓度的增加,材料的介电常数(εr)和介电损耗(εi)均有所增加,这表明材料中存在缺陷位点和载流子捕获。温度在30 ~ 110℃范围内,辐照后材料的交流电导率(σac)显著升高,且辐照剂量越大,温度越高,电导率越高。活化能(Ea)随辐射剂量的增加而降低,反映了辐射引起的结构改变。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
Journal of Composites Science
Journal of Composites Science MATERIALS SCIENCE, COMPOSITES-
CiteScore
5.00
自引率
9.10%
发文量
328
审稿时长
11 weeks
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信