Suffusion in densely compacted Satozuka pumice sand and its impact on static loading undrained shear strength and dilation behaviour

Abstract

Pumice sand of volcanic origin contains a high fraction of non-plastic fines (>40 % for Satozuka pumice sand in Sapporo, Japan). Suffusion in such soil can wash away a portion of the fine particles and alter the soil microstructure. The moisture content and degree of compaction can affect the suffusion characteristics of soil deposits, however their effect has not yet been evaluated. Future construction sites in growing Sapporo City, consisting of pumice sand, will require a high degree of compaction (over 90 % and preferably over 95 %) as this sand is prone to suffusion in spite of its dense state. The aim of this study is to assess the impact of suffusion on densely compacted pumice sand with a high proportion of fines, based on its mechanical properties, with an emphasis on shear strength and dilatancy. Firstly, the suffusion characteristics of Satozuka pumice sand were evaluated. Subsequently, undrained triaxial tests ($\overline{CU}$ tests) under monotonic loading were conducted on high-density specimens, with suffusion and without suffusion, to study the impact of suffusion. It is seen in the results that the hydraulic conductivity, shear strength, stress paths, and dilatancy are all noticeably affected by suffusion. The specimens with suffusion exhibit an increase in residual shear strength and maximum deviator stress under shearing and experience an earlier occurrence of phase transformation from contraction to dilation during shearing. This tendency implies that suffusion has no significant negative impact on the deterioration of earth fill made from pumice sand and non-plastic fines, and that it persists at degrees of compaction between 80 % and 100 %.