Mechanical behaviour, microstructure and texture studies of wire arc additive manufactured 304L stainless steel

IF 0.7 4区材料科学 Q4 METALLURGY & METALLURGICAL ENGINEERING

International Journal of Materials Research Pub Date : 2023-10-01 DOI:10.1515/ijmr-2022-0302

Minnam Reddy Suryanarayana Reddy, Guttula Venkata Sarath Kumar, Topalle Bhaskar, Subhasis Sahoo, Mekala Chinababu, Katakam Sivaprasad

引用次数: 0

Abstract

Abstract Wire arc melting is considered one of the most efficient processes in additive manufacturing in terms of material printed to material consumed ratio. 304 stainless steel is one of the prominent stainless steels with superior corrosion resistance and mechanical properties. 304 stainless steel components were deposited by wire arc additive manufacturing, depositing subsequent layers in the same and perpendicular directions. Mechanical properties, microstructure, XRD and microtexture studies were done by EBSD have been done for both the conditions and compared. Mechanical properties were found to be similar for both the conditions whereas the microstructure and microtexture showed equiaxed grains for depositing in the same direction and columnar grains for deposition in the perpendicular direction.

查看原文本刊更多论文

304L不锈钢丝弧添加剂的力学性能、显微组织和织构研究

电弧熔炼被认为是增材制造中打印材料与消耗材料比例最高的工艺之一。304不锈钢是一种突出的不锈钢，具有优异的耐腐蚀性和机械性能。采用电弧增材制造技术沉积304不锈钢部件，在相同和垂直方向上沉积后续层。用EBSD对两种条件下材料的力学性能、微观结构、XRD和显微织构进行了研究，并进行了比较。结果表明，两种条件下合金的力学性能基本一致，但微观组织和显微组织表现为沿同一方向沉积的等轴晶和沿垂直方向沉积的柱状晶。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

International Journal of Materials Research 工程技术-冶金工程

CiteScore

1.30

自引率

12.50%

发文量

119

审稿时长

6.4 months

期刊介绍： The International Journal of Materials Research (IJMR) publishes original high quality experimental and theoretical papers and reviews on basic and applied research in the field of materials science and engineering, with focus on synthesis, processing, constitution, and properties of all classes of materials. Particular emphasis is placed on microstructural design, phase relations, computational thermodynamics, and kinetics at the nano to macro scale. Contributions may also focus on progress in advanced characterization techniques. All articles are subject to thorough, independent peer review.