Physical and optical properties of In2S3 thin films deposited by thermal evaporation technique for CIGS solar cells

Abstract

Indium sulphide is an promising buffer material with higher bandgap for CIGS solar cells. Promising results on the optical properties and morphology of deposited InxSy were found. In2S3 thin films were deposited onto glass substrates using thermal evaporation technique. Indium (In) and sulphur (S) powder were evaporated with different In/S ratio, where the stoichiometry and non-stoichiometry composition of InxSy influenced the optical bandgap and surface morphology. The films were structurally and optically characterized by X-ray diffraction, atomic force microscopy and UV measurements. It has been found that, the optical direct bandgap varied from 2.3 eV to 2.5 eV with the different composition ratio of InxSy. The X-ray diffraction data shows that the films have cubic ß-In2S3 structure onto the glass substrates. AFM images illustrate the surfaces quite smooth and uniform with a low surface roughness. These results can be explained in the practical work as non-stoichiometric composition of indium sulphide may result in different band gaps. Hence, a specific stoichiometric composition which results in the highest band gap is desirable to achieve high efficiency InxSy-CIGS solar cell. This is due to the lesser photon loss in the buffer layer as the light passes into the absorber layer. From the fabrication results, numerous influences of In2S3 buffer layer are investigated that can be implemented to the fabrication of high efficiency CIGS solar cells.