STUDY OF THE INFLUENCE OF MANUFACTURING CONDITIONS ON THE PHOTOCONDUCTIVITY OF THE SECTION BOUNDARY OF TWO POLYMER FILMS

Abstract

The study of optical properties in organic materials requires taking into account a wide range of features of these materials in connection with their sensitivity to external influences and aggressive environment. In this work, we studied the features of the photoconductivity of the interface between two dielectrics (polydiphenylene phthalide (PDP)) manufactured under different conditions. Drying was carried out in air and in vacuum. This study is necessary to determine the features of the manufacturing process and its effect on the photoconductive properties of the interface. Currently, the structure of the polymer / polymer interface has been fairly well studied by various methods, in particular, atomic force microscopy. However, there is a certain difficulty in obtaining repeatable results due to the presence of dilution of the lower PDP film when the upper polymer layer is applied. In this work, the photoconductive properties were studied on the basis of the measurements of the current-voltage characteristics (CVC) and the curves of the growth and relaxation of the photocurrent. Based on the results obtained within the framework of this work, it is possible to draw conclusions about the contribution of the drying method of experimental structures to the photoconductivity of the interface. It is known that oxygen makes a significant contribution to the electrical conductivity of thin PDP films. Earlier, it was shown on this polymer material that the presence of oxygen leads to a decrease in the conductivity of PDP films due to the formation of charge carrier traps. Moreover, when oxygen interacts with fragments of a polymer molecule, a chemical bond does not arise, which leads to a reversible change in electrical conductivity with a change in oxygen concentration. Due to this, the PDP films demonstrate a high stability of the electrophysical characteristics for several years when repeated measurements are carried out in an open atmosphere and at room temperature. It can be argued that the effect on the response of photoconductivity in organic materials, as well as on the relaxation time, can be associated with the presence of oxygen traps in the PDP films, increasing the relaxation time. This result is extremely important from the point of view of the practical application of these structures.