Development of reforming technology for a portable generator

IECEC-97 Proceedings of the Thirty-Second Intersociety Energy Conversion Engineering Conference (Cat. No.97CH6203) Pub Date : 1997-12-31 DOI:10.1109/IECEC.1997.661879

N. Hashimoto, H. Kudo, J. Adachi, M. Shinagawa, N. Yamaga, A. Igarashi

引用次数: 3

Abstract

Butane was investigated as a fuel for a portable generator using a polymer membrane fuel cell (PEFC). A steam reforming technology was applied and Ru was investigated as a catalyst for a reforming process and a selective oxidation process. It was found that Ru realized a high space velocity (SV) which enables reduction of a volume of the reformer. The reformer manufactured was connected with PEFC and operated using butane, indicating that a drop of the cell voltage was small enough. Concentration of CO in the reformate gas was less than 10 ppm.

查看原文本刊更多论文

便携式发电机改造技术的发展

研究了丁烷作为聚合物膜燃料电池(PEFC)便携式发电机的燃料。采用蒸汽重整工艺，研究了Ru作为重整工艺和选择性氧化工艺的催化剂。发现Ru实现了高空速(SV)，这使得重整器的体积减小。所制造的重整器与PEFC连接，并使用丁烷操作，表明电池电压下降足够小。重整气中CO的浓度小于10ppm。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

IECEC-97 Proceedings of the Thirty-Second Intersociety Energy Conversion Engineering Conference (Cat. No.97CH6203)

自引率

0.00%

发文量