Wireless Transmission of IGBT Driver Control

2009 Twenty-Fourth Annual IEEE Applied Power Electronics Conference and Exposition Pub Date : 2009-03-21 DOI:10.1109/APEC.2009.4802825

C. Batard, G. Andrieux, N. Ginot, M. Mannah

引用次数: 15

Abstract

In a commutation cell, the implementation of IGBT and MOS requires an insulated signal. Traditionally, the insulated signal is carried out by a DC supply with a high insulation transformer for energy transmission and an optical fiber or pulse transformer for the switch control information. A new approach seems promising: the switch control information by a wireless transmission. Analog or digital switch control informations are envisaged. Experimental tests were done on a 1 kW buck converter controlled with a 2.4 GHz video transmitter

查看原文本刊更多论文

IGBT驱动控制的无线传输

在整流单元中，IGBT和MOS的实现需要一个绝缘信号。传统上，绝缘信号由带有高绝缘变压器的直流电源传输，用于能量传输，光纤或脉冲变压器用于开关控制信息。一种新的方法似乎很有希望:通过无线传输开关控制信息。设想模拟或数字开关控制信息。在2.4 GHz视频发射机控制的1 kW降压变换器上进行了实验测试

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

2009 Twenty-Fourth Annual IEEE Applied Power Electronics Conference and Exposition

自引率

0.00%

发文量