Dynamic variation characteristics of glowing contact resistance

Jing Zhang, Tao Chen, G. Su, Chang-Ho Li, Wenzhong Mi
{"title":"Dynamic variation characteristics of glowing contact resistance","authors":"Jing Zhang, Tao Chen, G. Su, Chang-Ho Li, Wenzhong Mi","doi":"10.1109/HLM54538.2022.9969806","DOIUrl":null,"url":null,"abstract":"Glowing contact is one of the ignition heat sources for electrical fires. However, the typical electrical fault has not been paid enough attention in China. Few studies are conducted under 220Vac, 50Hz and test copper wires complying with China's national standard. In terms of glowing contact, resistance determines the voltage drop, a significant criterion in loose contact detection. Thus, we conduct experiments under 220Vac and discuss the dynamic variation characteristics of the glowing contact resistance. The Volt-Ampere characteristics curve shows that the glowing contact oxide bridge is non-linear resistance. Then, we discuss the temporal variation characteristics of the resistance and build up a dynamic model to describe the changes. Results indicate that the growth of the oxide bridge determines the resistance variation trends. Resistance will increase linearly with time when the current is less than 4A. However, the dom-inant role of oxide length is weakened when currents continue rising. We also explore the effects of wire diameters. It indicates that the difference between various wires is apparent with lower currents. Empirical formulas for calculating the minimum glowing contact resistance under different wire diameters and currents are given. Finally, the current decrease and the decrease ratio can be used as indicators for glowine contact detection.","PeriodicalId":327697,"journal":{"name":"2022 IEEE 67th Holm Conference on Electrical Contacts (HLM)","volume":"56 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2022-10-23","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"2022 IEEE 67th Holm Conference on Electrical Contacts (HLM)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/HLM54538.2022.9969806","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 1

Abstract

Glowing contact is one of the ignition heat sources for electrical fires. However, the typical electrical fault has not been paid enough attention in China. Few studies are conducted under 220Vac, 50Hz and test copper wires complying with China's national standard. In terms of glowing contact, resistance determines the voltage drop, a significant criterion in loose contact detection. Thus, we conduct experiments under 220Vac and discuss the dynamic variation characteristics of the glowing contact resistance. The Volt-Ampere characteristics curve shows that the glowing contact oxide bridge is non-linear resistance. Then, we discuss the temporal variation characteristics of the resistance and build up a dynamic model to describe the changes. Results indicate that the growth of the oxide bridge determines the resistance variation trends. Resistance will increase linearly with time when the current is less than 4A. However, the dom-inant role of oxide length is weakened when currents continue rising. We also explore the effects of wire diameters. It indicates that the difference between various wires is apparent with lower currents. Empirical formulas for calculating the minimum glowing contact resistance under different wire diameters and currents are given. Finally, the current decrease and the decrease ratio can be used as indicators for glowine contact detection.
发光接触电阻的动态变化特性
发热接触是电气火灾的引燃热源之一。然而,典型的电气故障在国内还没有得到足够的重视。很少在220Vac, 50Hz下进行研究,测试符合中国国家标准的铜线。在发光触点方面,电阻决定了电压降,这是检测松动触点的一个重要标准。因此,我们在220Vac下进行了实验,讨论了发光接触电阻的动态变化特性。伏安特性曲线表明,发光接触氧化桥是非线性电阻。在此基础上,讨论了其时间变化特征,并建立了描述其变化的动态模型。结果表明,氧化桥的生长决定了电阻的变化趋势。当电流小于4A时,电阻随时间线性增加。然而,当电流持续上升时,氧化物长度的主导作用减弱。我们还探讨了导线直径的影响。这表明,在电流较低的情况下,各种导线之间的差异是明显的。给出了不同导线直径和电流下最小发热接触电阻的经验计算公式。最后,将电流减小量和减小比作为荧光接触检测的指标。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信
小红书