Multi-GHz microstrip transmission lines realised by screen printing on flexible substrates

Abstract

This paper reports experimental work on 50 Ω microstrip transmission lines implemented by screen-printing low-cost silver paste onto thin flexible polyethylene terephthalate (PET) substrates of varying thickness. The microstrip line designs are based on PET substrates with thicknesses of 1.4 mm, 0.7 mm and 0.5 mm, leading to conductive track widths of 3.8 mm, 1.7 mm and 1.2 mm respectively for a 50 Ω line; these designs were then realised. The S-parameter measurements show that the insertion loss of the microstrip transmission lines on each substrate can be as low as 0.2 dB/cm, 0.17 dB/cm, and 0.14 dB/cm up to a frequency of 5 GHz in spite of the average quality of the silver paste used. The experimental results also show that the screen-printed transmission lines still work quite well in bent condition and wearable electronics application at GHz is possible.