PRELIMINARY TESTS OF INSERTS MADE IN ADDITIVE TECHNOLOGY FOR SMALL GUN SILENCERS

PROBLEMY TECHNIKI UZBROJENIA Pub Date : 2023-06-27 DOI:10.5604/01.3001.0053.7228

M. Magier, Rafał Wróblewski, M. Bajkowski, K. Szczurowski, M. Jasiński, P. Tadzik, R. Grygoruk, Maja Żelichowska, Paweł Sweklej, Mikołaj Bogajczyk

引用次数: 0

Abstract

The article presents the results of tests of inserts made in additive technology for a small arms silencer of 5.6 mm caliber, intended for the Tippmann M4-22 PRO-S carbine with 1/2x28 UNEF R/H thread. The tests were carried out in the Ballistics Laboratory of the Department of Mechanics and Armament Technology, Institute of Mechanics and Printing, Faculty of Mechanical Engineering, Warsaw University of Technology

查看原文本刊更多论文

用增材制造技术制造的小枪消声器内嵌件的初步试验

本文介绍了用增材制造技术制造的5.6毫米口径小武器消声器镶件的测试结果，该镶件用于1/2x28 UNEF R/H螺纹的Tippmann M4-22 PRO-S卡宾枪。试验是在华沙理工大学机械工程学院机械和印刷研究所机械和武器技术系的弹道实验室进行的

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

PROBLEMY TECHNIKI UZBROJENIA

自引率

0.00%

发文量