3D Metal Printed Deformed Elliptical Cavity Bandpass Filter with an Additional Plate

2021 IEEE CPMT Symposium Japan (ICSJ) Pub Date : 2021-11-10 DOI:10.1109/ICSJ52620.2021.9648552

Povilas Vaitukaitis, K. Nai, Jiayu Rao, Jiasheng Hong

引用次数: 2

Abstract

This paper presents a modified deformed elliptical cavity resonator. 5-pole bandpass filter was designed, and 3D printed using Selective Laser Melting (SLM) as a prototype. The measured results have a relatively good agreement with simulated ones.

查看原文本刊更多论文

3D金属打印变形椭圆腔带通滤波器与附加板

本文提出了一种改进的变形椭圆腔谐振器。设计了5极带通滤波器，并以选择性激光熔化(SLM)为原型进行了3D打印。实测结果与模拟结果吻合较好。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

2021 IEEE CPMT Symposium Japan (ICSJ)

自引率

0.00%

发文量