Dual mode photoacoustic and ultrasound imaging system based on a Fabry-Perot scanner (Conference Presentation)

Khoa Pham, S. Noimark, N. Huynh, E. Zhang, Adrien Desjardins, B. Cox, P. Beard
{"title":"Dual mode photoacoustic and ultrasound imaging system based on a Fabry-Perot scanner (Conference Presentation)","authors":"Khoa Pham, S. Noimark, N. Huynh, E. Zhang, Adrien Desjardins, B. Cox, P. Beard","doi":"10.1117/12.2506922","DOIUrl":null,"url":null,"abstract":"Compared to piezoelectric based photoacoustic (PA) scanners, the planar Fabry-Perot (FP) scanner has several advantages. It can provide small element size with high sensitivity, a smooth broadband frequency response, and is transparent to excitation light. This enables the FP scanner to provide excellent high-resolution in vivo PA images of soft tissue to depths up to approximately 10 mm. However, unlike piezoelectric scanners, the FP scanner in its current form cannot provide a pulse-echo ultrasound (US) as well as a PA image, which is useful because of the additional tissue contrast it provides. To address this, a dual mode FP scanner-based system that, for the first time, can acquire co-registered 3D PA and US images has been developed.\n\nIn order to provide an optical US generation capability, the FP ultrasound sensor was coated with a novel Gold-Nanoparticle-PDMS composite which was excited with nanosecond laser pulses to generate plane wave US pulses. By modifying the FP sensor in this way, it now acts as an US transmitter as well as a receiver. The coating is highly absorbing at the US generation wavelength (>95%) but transparent at the PA excitation wavelength, the latter to allow the system to also operate in PA imaging mode as before. The generated US pulses exhibited peak pressures in the MPa range, which is comparable to the output of conventional piezoelectric based medical US scanners. The pulses had a broad bandwidth (>40 MHz) and the emitted wavefront was planar to within λ/10 at 10 MHz. PA and pulse-echo US signals were mapped in turn by the FP scanner over centimetre scale areas with a step size of 100 μm and an element size of 64 μm. The -3dB bandwidth of the FP sensor was 30 MHz. Reconstruction methods using a k-space formulation recovered co-registered 3D PA and US images. The system’s lateral spatial resolution was evaluated by imaging a line target at depths up to 10 mm and ranged between 50 and 120 μm for both modes.\n\nArbitrarily shaped 3D objects were imaged to demonstrate the volumetric US imaging capability of the scanner. Tissue mimicking phantoms, with impedance mismatches representative of soft tissues, and ex vivo tissue samples were imaged with the system as well as a conventional clinical US scanner for comparison. Finally, the system obtained promising high-resolution 3D dual mode PA-US images for a variety of phantoms with contrast based on both optical absorption and acoustic impedance. This novel all-optical system has the potential to add complementary morphological contrast to photoacoustic vascular images which could aid the clinical assessment of superficial tumours, lymph node disease and other conditions.","PeriodicalId":206495,"journal":{"name":"Photons Plus Ultrasound: Imaging and Sensing 2019","volume":"732 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2019-03-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Photons Plus Ultrasound: Imaging and Sensing 2019","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1117/12.2506922","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

Abstract

Compared to piezoelectric based photoacoustic (PA) scanners, the planar Fabry-Perot (FP) scanner has several advantages. It can provide small element size with high sensitivity, a smooth broadband frequency response, and is transparent to excitation light. This enables the FP scanner to provide excellent high-resolution in vivo PA images of soft tissue to depths up to approximately 10 mm. However, unlike piezoelectric scanners, the FP scanner in its current form cannot provide a pulse-echo ultrasound (US) as well as a PA image, which is useful because of the additional tissue contrast it provides. To address this, a dual mode FP scanner-based system that, for the first time, can acquire co-registered 3D PA and US images has been developed. In order to provide an optical US generation capability, the FP ultrasound sensor was coated with a novel Gold-Nanoparticle-PDMS composite which was excited with nanosecond laser pulses to generate plane wave US pulses. By modifying the FP sensor in this way, it now acts as an US transmitter as well as a receiver. The coating is highly absorbing at the US generation wavelength (>95%) but transparent at the PA excitation wavelength, the latter to allow the system to also operate in PA imaging mode as before. The generated US pulses exhibited peak pressures in the MPa range, which is comparable to the output of conventional piezoelectric based medical US scanners. The pulses had a broad bandwidth (>40 MHz) and the emitted wavefront was planar to within λ/10 at 10 MHz. PA and pulse-echo US signals were mapped in turn by the FP scanner over centimetre scale areas with a step size of 100 μm and an element size of 64 μm. The -3dB bandwidth of the FP sensor was 30 MHz. Reconstruction methods using a k-space formulation recovered co-registered 3D PA and US images. The system’s lateral spatial resolution was evaluated by imaging a line target at depths up to 10 mm and ranged between 50 and 120 μm for both modes. Arbitrarily shaped 3D objects were imaged to demonstrate the volumetric US imaging capability of the scanner. Tissue mimicking phantoms, with impedance mismatches representative of soft tissues, and ex vivo tissue samples were imaged with the system as well as a conventional clinical US scanner for comparison. Finally, the system obtained promising high-resolution 3D dual mode PA-US images for a variety of phantoms with contrast based on both optical absorption and acoustic impedance. This novel all-optical system has the potential to add complementary morphological contrast to photoacoustic vascular images which could aid the clinical assessment of superficial tumours, lymph node disease and other conditions.
基于Fabry-Perot扫描仪的双模光声超声成像系统(会议报告)
与基于压电的光声(PA)扫描仪相比,平面法布里-珀罗(FP)扫描仪具有几个优点。它可以提供小的元件尺寸,高灵敏度,平滑的宽带频率响应,并且对激发光是透明的。这使得FP扫描仪能够提供高分辨率的活体软组织PA图像,深度可达约10毫米。然而,与压电扫描仪不同,目前形式的FP扫描仪不能提供脉冲回波超声(US)和PA图像,这是有用的,因为它提供了额外的组织对比度。为了解决这个问题,一种基于双模式FP扫描仪的系统首次被开发出来,该系统可以获得共同注册的3D PA和US图像。为了使FP超声传感器具有产生光脉冲的能力,我们在该传感器表面涂覆了一种新型的金纳米粒子- pdms复合材料,该复合材料被纳秒级激光脉冲激发以产生平面波脉冲。通过以这种方式修改FP传感器,它现在充当美国发射器以及接收器。该涂层在US产生波长处具有高吸收率(>95%),但在PA激发波长处是透明的,后者允许系统像以前一样在PA成像模式下运行。产生的US脉冲显示出在MPa范围内的峰值压力,这与传统的基于压电的医用US扫描仪的输出相当。脉冲具有宽带宽(>40 MHz),在10 MHz处发射的波前是平面的,在λ/10以内。采用步长为100 μm、单元尺寸为64 μm的FP扫描仪在厘米尺度上依次映射PA和脉冲回波US信号。FP传感器的-3dB带宽为30mhz。使用k空间公式的重建方法恢复了共配准的3D PA和US图像。两种模式下,系统的横向空间分辨率通过对深度为10 mm、范围为50 ~ 120 μm的线目标进行成像来评估。对任意形状的3D物体进行成像,以证明扫描仪的体积成像能力。组织模拟的幻影,阻抗不匹配的软组织代表,和离体组织样本成像与系统以及传统的临床扫描仪进行比较。最后,该系统获得了基于光吸收和声阻抗对比度的各种幻影的高分辨率3D双模PA-US图像。这种新型的全光学系统有可能为光声血管图像增加互补的形态对比,从而有助于对浅表肿瘤、淋巴结疾病和其他疾病的临床评估。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信