{"title":"Evaluation of Lifetime-based Pressure-Sensitive Paint Measurement in Low-speed Flow","authors":"T. Yamashita, H. Nagai, K. Asai","doi":"10.1109/ICIASF.2007.4380884","DOIUrl":null,"url":null,"abstract":"The lifetime-based method has been applied to pressure-sensitive paint (PSP) measurement in low-speed flow. Based on theoretical considerations and sample tests, a method to calculate pressure using \"a-priori\" method was proposed. In this method, pressure is related to the ratio of the luminescent intensity ratios obtained at two different gates between the wind-on and wind-off conditions, multiplied by a temperature correction factor calculated from the single-point measurement of model substrate temperature. The sample tests showed that the effect of temperature as well as non-uniformity of lifetime could be cancelled out by the proposed method. In order to evaluate the effectiveness of this method, a simplified car model was tested in a low-speed wind tunnel. The result obtained by the lifetime method was in good agreement with those of pressure taps and the intensity method.","PeriodicalId":195072,"journal":{"name":"2007 22nd International Congress on Instrumentation in Aerospace Simulation Facilities","volume":"22 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2007-06-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"2007 22nd International Congress on Instrumentation in Aerospace Simulation Facilities","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/ICIASF.2007.4380884","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 1
Abstract
The lifetime-based method has been applied to pressure-sensitive paint (PSP) measurement in low-speed flow. Based on theoretical considerations and sample tests, a method to calculate pressure using "a-priori" method was proposed. In this method, pressure is related to the ratio of the luminescent intensity ratios obtained at two different gates between the wind-on and wind-off conditions, multiplied by a temperature correction factor calculated from the single-point measurement of model substrate temperature. The sample tests showed that the effect of temperature as well as non-uniformity of lifetime could be cancelled out by the proposed method. In order to evaluate the effectiveness of this method, a simplified car model was tested in a low-speed wind tunnel. The result obtained by the lifetime method was in good agreement with those of pressure taps and the intensity method.