{"title":"The study of parameters variation of nMOSFET affected by the HCI","authors":"Xiaowen Zhang, Xiaoling Lin, Rui Gao","doi":"10.1109/ASICON52560.2021.9620384","DOIUrl":null,"url":null,"abstract":"Hot Carrier injection (HCI) degradation is a critical issue for deep sup micro and nm technology. An Accelerated lifetime experiment is proposed in this paper to study the parameters degradation of nMOSFET induced by the HCI. A Device is considered to fail when a chosen device parameter changes by more than the specified failure criterion at worst use condition (typically VDDMAX= 1.1VDD) at a specified end of life. The results shows that the MTTF of HCI is depend on the parameter choose from. If the failure criteria is |ΔIds,sat/Ids,sat|=10%, then the MTTF has the maximum value. The model parameter m of Substrate/drain current ratio has been compared by using three stress conditions with single stress condition, it shows that the model parameter N obtained by single stress condition has low value.","PeriodicalId":233584,"journal":{"name":"2021 IEEE 14th International Conference on ASIC (ASICON)","volume":"3 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2021-10-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"2021 IEEE 14th International Conference on ASIC (ASICON)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/ASICON52560.2021.9620384","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0
Abstract
Hot Carrier injection (HCI) degradation is a critical issue for deep sup micro and nm technology. An Accelerated lifetime experiment is proposed in this paper to study the parameters degradation of nMOSFET induced by the HCI. A Device is considered to fail when a chosen device parameter changes by more than the specified failure criterion at worst use condition (typically VDDMAX= 1.1VDD) at a specified end of life. The results shows that the MTTF of HCI is depend on the parameter choose from. If the failure criteria is |ΔIds,sat/Ids,sat|=10%, then the MTTF has the maximum value. The model parameter m of Substrate/drain current ratio has been compared by using three stress conditions with single stress condition, it shows that the model parameter N obtained by single stress condition has low value.