Scanning accuracy and scanning area discrepancies of intraoral digital scans acquired at varying scanning distances and angulations among 4 different intraoral scanners

Abstract

Statement of problem

The accuracy of intraoral scanners (IOSs) can be affected by operator handling; however, the scanning area and accuracy discrepancies acquired at different scanning distances and angulations among IOSs remain uncertain.

Purpose

The objective of this in vitro study was to compare the scanning area and scanning accuracy of the intraoral digital scans obtained at 3 scanning distances with 4 different scanning angulations among 4 different IOSs.

Material and methods

A reference device (reference file) was designed with 4 inclinations (0, 15, 30, and 45 degrees) and printed. Four groups were created based on the IOS: i700, TRIOS4, CS 3800, and iTero scanners. Four subgroups were generated depending on the scanning angulation (0, 15, 30, and 45 degrees). Each subgroup was divided into 3 subgroups based on the scanning distance: 0, 2, and 4 mm (N=720, n=15). The reference devices were positioned in a z-axis calibrated platform for standardizing the scanning distance. In the i700-0-0 subgroup, the 0-degree reference device was positioned in the calibrated platform. The wand of the IOS was positioned in a supporting framework with a 0-mm scanning distance, and the scans were acquired. In the i700-0-2 subgroup, the platform was lowered for a 2-mm scanning distance followed by the specimen acquisition. In the i700-0-4 subgroup, the platform was further lowered for a 4-mm scanning distance, and the scans were obtained. For the i700-15, i700-30, and i700-45 subgroups, the same procedures were carried out as in the i700-0 subgroups respectively, but with the 10-, 15-, 30-, or 45-degree reference device. Similarly, the same procedures were completed for all the groups with the corresponding IOS. The area of each scan was measured. The reference file was used to measure the discrepancy with the experimental scans by using the root mean square (RMS) error. Three-way ANOVA and post hoc Tukey pairwise comparison tests were used to analyze the scanning area data. Kruskal–Wallis and multiple pairwise comparison tests were used to analyze the RMS data (α=.05).

Results

IOS (P<.001), scanning distance (P<.001), and scanning angle (P<.001) were significant factors of the scanning area measured among the subgroups tested. A significant group×subgroup interaction was found (P<.001). The iTero and the TRIOS4 groups obtained higher scanning area mean values than the i700 and CS 3800 groups. The CS 3800 obtained the lowest scanning area among the IOS groups tested. The 0-mm subgroups obtained a significantly lower scanning area than the 2- and 4-mm subgroups (P<.001). The 0- and 30-degree subgroups obtained a significantly lower scanning area than the 15- and 45-degree subgroups (P<.001). The Kruskal–Wallis test revealed significant median RMS discrepancies (P<.001). All the IOS groups were significantly different from each other (P<.001), except for the CS 3800 and TRIOS4 groups (P>.999). All the scanning distance groups were different from each other (P<.001).

Conclusions

Scanning area and scanning accuracy were influenced by the IOS, scanning distance, and scanning angle selected to acquire the digital scans.