Determination of the CTV-PTV margin for prostate cancer radiotherapy depending on the prostate gland positioning control method

Abstract Objective: The objective of the study was to determine the correct CTV-PTV margin, depending on the method used to verify the PG position. In the study, 3 methods of CBCT image superimposition were assessed as based on the location of the prostate gland (CBCT images), a single gold marker, and pubic symphysis respectively. Materials and methods: The study group consisted of 30 patients undergoing irradiation therapy at the University Hospital in Zielona Góra. The therapy was delivered using the VMAT (Volumetric Modulated Arc Therapy) protocol. CBCT image-based superimposition (prostate-based alignment) was chosen as the reference method. The uncertainty of the PG positioning method was determined and the margin to be used was determined for the CBCT-based reference method. Then, changes in the position of the prostate gland relative to these determined using the single marker and pubic symphysis-based methods were determined. The CTV-PTV margin was calculated at the root of the sum of the squares for the doubled value of method uncertainty for the CBCT image-based alignment method and the value of the difference between the locations of planned and actual isocenters as determined using the method of interest and the CBCT-based alignment method for which the total number of differences accounted for 95% of all differences. Results: The CTV-PTV margins to be used when the prostate gland is positioned using the CBCT imaging, single marker, and pubic symphysis-based methods were determined. For the CBCT-based method, the following values were obtained for the Vrt, Lng, and Lat directions respectively: 0.43 cm, 0.48 cm, 0.29 cm. For the single marker-based method, the respective values were 0.7 cm, 0.88 cm, and 0.44 cm whereas for the pubic symphysis-based method these were 0.65 cm, 0.76 cm, and 0.46 cm. Conclusions: Regardless of the method, the smallest margin values were obtained for the lateral direction, with the CBCT-based method facilitating the smallest margins to be used. The largest margins were obtained using the single marker-based alignment method.