成形接头在设计原型台上的试验

Q3 Chemical Engineering

International Journal of Applied Mechanics and Engineering Pub Date : 2022-08-29 DOI:10.2478/ijame-2022-0045

Nikodem Wróbel, Mateusz Franka, Michał Rejek, Zhixiong Li, J. Królczyk, M. Sliwinski

{"title":"成形接头在设计原型台上的试验","authors":"Nikodem Wróbel, Mateusz Franka, Michał Rejek, Zhixiong Li, J. Królczyk, M. Sliwinski","doi":"10.2478/ijame-2022-0045","DOIUrl":null,"url":null,"abstract":"Abstract In presented paper perform prototype machine which consist of two independent motion axis equipped with force sensors. Used force sensors provide control of forming connection. Special design of the machine provide to make tensile strength test on it. Prepared nine samples to carried out tests, which revealed the influence between change of jaws displacement during plastic deformation and strength of that joint. Created prototype stand base on two independent drive units allow to make that connection possible. Choosing right parameters leads to generate joints which are more than twice stronger than basic sample reaching more than 920N.","PeriodicalId":37871,"journal":{"name":"International Journal of Applied Mechanics and Engineering","volume":"257 1","pages":"212 - 223"},"PeriodicalIF":0.0000,"publicationDate":"2022-08-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Testing of Formed Joints on a Designed Prototype Station\",\"authors\":\"Nikodem Wróbel, Mateusz Franka, Michał Rejek, Zhixiong Li, J. Królczyk, M. Sliwinski\",\"doi\":\"10.2478/ijame-2022-0045\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Abstract In presented paper perform prototype machine which consist of two independent motion axis equipped with force sensors. Used force sensors provide control of forming connection. Special design of the machine provide to make tensile strength test on it. Prepared nine samples to carried out tests, which revealed the influence between change of jaws displacement during plastic deformation and strength of that joint. Created prototype stand base on two independent drive units allow to make that connection possible. Choosing right parameters leads to generate joints which are more than twice stronger than basic sample reaching more than 920N.\",\"PeriodicalId\":37871,\"journal\":{\"name\":\"International Journal of Applied Mechanics and Engineering\",\"volume\":\"257 1\",\"pages\":\"212 - 223\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2022-08-29\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"International Journal of Applied Mechanics and Engineering\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.2478/ijame-2022-0045\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"Chemical Engineering\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Applied Mechanics and Engineering","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.2478/ijame-2022-0045","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"Chemical Engineering","Score":null,"Total":0}

引用次数: 0

摘要

本文设计了由两个独立运动轴组成的装有力传感器的样机。使用力传感器控制成形连接。特殊设计的机器可对其进行拉伸强度试验。制备了9个试件进行试验，揭示了接头塑性变形时颌部位移的变化对接头强度的影响。在两个独立的驱动单元上创建了原型支架，使连接成为可能。选择合适的参数，生成的接头强度达到920N以上，是基本试样的2倍以上。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Testing of Formed Joints on a Designed Prototype Station

Abstract In presented paper perform prototype machine which consist of two independent motion axis equipped with force sensors. Used force sensors provide control of forming connection. Special design of the machine provide to make tensile strength test on it. Prepared nine samples to carried out tests, which revealed the influence between change of jaws displacement during plastic deformation and strength of that joint. Created prototype stand base on two independent drive units allow to make that connection possible. Choosing right parameters leads to generate joints which are more than twice stronger than basic sample reaching more than 920N.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

International Journal of Applied Mechanics and Engineering Engineering-Civil and Structural Engineering

CiteScore

1.50

自引率

0.00%

发文量

审稿时长

35 weeks

期刊介绍： INTERNATIONAL JOURNAL OF APPLIED MECHANICS AND ENGINEERING is an archival journal which aims to publish high quality original papers. These should encompass the best fundamental and applied science with an emphasis on their application to the highest engineering practice. The scope includes all aspects of science and engineering which have relevance to: biomechanics, elasticity, plasticity, vibrations, mechanics of structures, mechatronics, plates & shells, magnetohydrodynamics, rheology, thermodynamics, tribology, fluid dynamics.