安装在滚动轮胎内部的摩擦纳米发电机的能量收集

2019 19th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS) Pub Date : 2019-12-01 DOI:10.1109/powermems49317.2019.61547400764

H. Tani, M. Sugimoto, K. Fushihara, Y. Nakao, R. Renguo, S. Koganezawa, Tagawa

{"title":"安装在滚动轮胎内部的摩擦纳米发电机的能量收集","authors":"H. Tani, M. Sugimoto, K. Fushihara, Y. Nakao, R. Renguo, S. Koganezawa, Tagawa","doi":"10.1109/powermems49317.2019.61547400764","DOIUrl":null,"url":null,"abstract":"In this study, we developed a triboelectric nanogenerator (TENG) for intelligent tires. This TENG was adhered on the inner surface of a racing cart tire. The charged voltage and output voltage of the TENG were evaluated on the moving belt. The output voltage signals were observed at the contact patch position. The charged voltage to the 10 µF capacitor of was found to be approximately 14 V at the speed of 16 km/h after the tire rolled for 15 min. These results suggest that TENG can work as an energy harvester for temperature and pressure sensors built into intelligent tires as well as for wireless transmission.","PeriodicalId":6648,"journal":{"name":"2019 19th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS)","volume":"55 1","pages":"1-2"},"PeriodicalIF":0.0000,"publicationDate":"2019-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":"{\"title\":\"Energy Harvesting from Triboelectric Nanogenerator Attached Inside Rolling Tire\",\"authors\":\"H. Tani, M. Sugimoto, K. Fushihara, Y. Nakao, R. Renguo, S. Koganezawa, Tagawa\",\"doi\":\"10.1109/powermems49317.2019.61547400764\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"In this study, we developed a triboelectric nanogenerator (TENG) for intelligent tires. This TENG was adhered on the inner surface of a racing cart tire. The charged voltage and output voltage of the TENG were evaluated on the moving belt. The output voltage signals were observed at the contact patch position. The charged voltage to the 10 µF capacitor of was found to be approximately 14 V at the speed of 16 km/h after the tire rolled for 15 min. These results suggest that TENG can work as an energy harvester for temperature and pressure sensors built into intelligent tires as well as for wireless transmission.\",\"PeriodicalId\":6648,\"journal\":{\"name\":\"2019 19th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS)\",\"volume\":\"55 1\",\"pages\":\"1-2\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2019-12-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"1\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2019 19th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/powermems49317.2019.61547400764\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2019 19th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/powermems49317.2019.61547400764","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 1

摘要

本研究开发了一种用于智能轮胎的摩擦电纳米发电机(TENG)。该TENG粘附在赛车轮胎的内表面。在运动带上对TENG的充电电压和输出电压进行了评估。在接触贴片位置观察输出电压信号。轮胎滚动15分钟后，在16公里/小时的速度下，10µF电容器的充电电压约为14 V。这些结果表明，TENG可以作为内置在智能轮胎中的温度和压力传感器的能量收集器，也可以用于无线传输。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Energy Harvesting from Triboelectric Nanogenerator Attached Inside Rolling Tire

In this study, we developed a triboelectric nanogenerator (TENG) for intelligent tires. This TENG was adhered on the inner surface of a racing cart tire. The charged voltage and output voltage of the TENG were evaluated on the moving belt. The output voltage signals were observed at the contact patch position. The charged voltage to the 10 µF capacitor of was found to be approximately 14 V at the speed of 16 km/h after the tire rolled for 15 min. These results suggest that TENG can work as an energy harvester for temperature and pressure sensors built into intelligent tires as well as for wireless transmission.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

2019 19th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS)

自引率

0.00%

发文量