Hamad Al-Rashidi, M. Hussein, Abdulaziz Erhamah, Satinder Malik, A. Al-Hajri, Dwane Almeida, N. Salehi, G. Omonte, A. Zaitoun
{"title":"降低松散砂岩地层高粘度油井的出水量","authors":"Hamad Al-Rashidi, M. Hussein, Abdulaziz Erhamah, Satinder Malik, A. Al-Hajri, Dwane Almeida, N. Salehi, G. Omonte, A. Zaitoun","doi":"10.2118/206333-ms","DOIUrl":null,"url":null,"abstract":"\n Large reserves of High-Viscous Oil in Kuwait calls for Improved Oil Recovery scenarios. In Kuwait unconsolidated sandstone formations, the sandstone intervals represent extensive reservoir intervals of sand separated by laterally extensive non-reservoir intervals that comprise finer-grained, argillaceous sands, silts and muds. The reservoir is shallow with high permeability (above 1000 mD) and under bottom aquifer pressure support. Due to strong viscosity contrast between oil and water, after breakthrough, the water cut rises quickly resulting in strong loss of production efficiency. Mitigating water production is thus mandatory to improve production conditions.\n The candidate wells have 2 to 3 open intervals in different rock facies with comingle production. The total perforated length is between 38 and 48 ft. Production is through PCP at a rate of around 300 bpd and BS&W is between 71 and 87%.\n The technology applied utilizes pre-gelled size-controlled product (SMG Microgels) having RPM properties, i.e. inducing a strong drop of relative permeability to water without affecting oil relative permeability. The size is chosen to selectively treat the high-permeability water producing zones while preserving the lower-permeability oil zones. The chemical can also withstand downhole harsh conditions such as salinity of around 170,000ppm and presence of 2% H2S.\n The treatment consisted of bullhead injection of 300 bbls of pre-gelled chemical through tubing. The first results seem very favourable, sincefor two wells, the water cut has dropped from 80 to 40% with almost same gross production rate. The incremental oil is more than 100 bopd. The third well did not show marked change after WSO treatment. The wells are under continuous monitoring to assess long-term performance.\n Such result, if confirmed, may lead to high possibilities for the improvement of heavy-oil reservoir production under aquifer support by mitigating water production with simple chemical bullhead injection.","PeriodicalId":10965,"journal":{"name":"Day 3 Thu, September 23, 2021","volume":null,"pages":null},"PeriodicalIF":0.0000,"publicationDate":"2021-09-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Mitigating Water Production from High Viscosity Oil Wells in Unconsolidated Sandstone Formations\",\"authors\":\"Hamad Al-Rashidi, M. Hussein, Abdulaziz Erhamah, Satinder Malik, A. Al-Hajri, Dwane Almeida, N. Salehi, G. Omonte, A. Zaitoun\",\"doi\":\"10.2118/206333-ms\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"\\n Large reserves of High-Viscous Oil in Kuwait calls for Improved Oil Recovery scenarios. In Kuwait unconsolidated sandstone formations, the sandstone intervals represent extensive reservoir intervals of sand separated by laterally extensive non-reservoir intervals that comprise finer-grained, argillaceous sands, silts and muds. The reservoir is shallow with high permeability (above 1000 mD) and under bottom aquifer pressure support. Due to strong viscosity contrast between oil and water, after breakthrough, the water cut rises quickly resulting in strong loss of production efficiency. Mitigating water production is thus mandatory to improve production conditions.\\n The candidate wells have 2 to 3 open intervals in different rock facies with comingle production. The total perforated length is between 38 and 48 ft. Production is through PCP at a rate of around 300 bpd and BS&W is between 71 and 87%.\\n The technology applied utilizes pre-gelled size-controlled product (SMG Microgels) having RPM properties, i.e. inducing a strong drop of relative permeability to water without affecting oil relative permeability. The size is chosen to selectively treat the high-permeability water producing zones while preserving the lower-permeability oil zones. The chemical can also withstand downhole harsh conditions such as salinity of around 170,000ppm and presence of 2% H2S.\\n The treatment consisted of bullhead injection of 300 bbls of pre-gelled chemical through tubing. The first results seem very favourable, sincefor two wells, the water cut has dropped from 80 to 40% with almost same gross production rate. The incremental oil is more than 100 bopd. The third well did not show marked change after WSO treatment. The wells are under continuous monitoring to assess long-term performance.\\n Such result, if confirmed, may lead to high possibilities for the improvement of heavy-oil reservoir production under aquifer support by mitigating water production with simple chemical bullhead injection.\",\"PeriodicalId\":10965,\"journal\":{\"name\":\"Day 3 Thu, September 23, 2021\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2021-09-15\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Day 3 Thu, September 23, 2021\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.2118/206333-ms\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Day 3 Thu, September 23, 2021","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.2118/206333-ms","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
Mitigating Water Production from High Viscosity Oil Wells in Unconsolidated Sandstone Formations
Large reserves of High-Viscous Oil in Kuwait calls for Improved Oil Recovery scenarios. In Kuwait unconsolidated sandstone formations, the sandstone intervals represent extensive reservoir intervals of sand separated by laterally extensive non-reservoir intervals that comprise finer-grained, argillaceous sands, silts and muds. The reservoir is shallow with high permeability (above 1000 mD) and under bottom aquifer pressure support. Due to strong viscosity contrast between oil and water, after breakthrough, the water cut rises quickly resulting in strong loss of production efficiency. Mitigating water production is thus mandatory to improve production conditions.
The candidate wells have 2 to 3 open intervals in different rock facies with comingle production. The total perforated length is between 38 and 48 ft. Production is through PCP at a rate of around 300 bpd and BS&W is between 71 and 87%.
The technology applied utilizes pre-gelled size-controlled product (SMG Microgels) having RPM properties, i.e. inducing a strong drop of relative permeability to water without affecting oil relative permeability. The size is chosen to selectively treat the high-permeability water producing zones while preserving the lower-permeability oil zones. The chemical can also withstand downhole harsh conditions such as salinity of around 170,000ppm and presence of 2% H2S.
The treatment consisted of bullhead injection of 300 bbls of pre-gelled chemical through tubing. The first results seem very favourable, sincefor two wells, the water cut has dropped from 80 to 40% with almost same gross production rate. The incremental oil is more than 100 bopd. The third well did not show marked change after WSO treatment. The wells are under continuous monitoring to assess long-term performance.
Such result, if confirmed, may lead to high possibilities for the improvement of heavy-oil reservoir production under aquifer support by mitigating water production with simple chemical bullhead injection.