表面涂层对阳极氧化法钛合金骨种植体耐蚀性的影响

IF 1.4 4区管理学 Q2 ENGINEERING, MULTIDISCIPLINARY

International Journal of Technology Management Pub Date : 2023-06-28 DOI:10.14716/ijtech.v14i4.6146

E. O. Ningrum, I. Khoiroh, Hanifah Inas Nastiti, Ryan Anindya Affan, A. D. Karisma, Elly Agustiani, A. Surono, H. Suroto, S. Suprapto, Lulu Sekar Taji, Sinung Widiyanto

{"title":"表面涂层对阳极氧化法钛合金骨种植体耐蚀性的影响","authors":"E. O. Ningrum, I. Khoiroh, Hanifah Inas Nastiti, Ryan Anindya Affan, A. D. Karisma, Elly Agustiani, A. Surono, H. Suroto, S. Suprapto, Lulu Sekar Taji, Sinung Widiyanto","doi":"10.14716/ijtech.v14i4.6146","DOIUrl":null,"url":null,"abstract":". In the presented work, the formation of anodic oxide film on Ti-6Al-4V ELI (Extra Low Interstitial) alloy in 0.02 M trisodium phosphate (Na 3 PO 4 ) electrolyte solution using various voltages were investigated. The color produced by the anodizing, the intensity of TiO2 content, the thickness of the oxide layer, and the corrosion rate were examined. It was obtained that the color appearance of Ti-6Al-4V ELI could be changed easily by altering the applied voltages. The higher the voltage applied in the anodizing process, the thicker the titanium oxide layer formed. The corrosion resistance analysis in a Simulated Body Fluid revealed that the non-anodized specimen showed a higher corrosion rate compared to the anodized specimen. The increase of oxide layer thickness leads to a significant decrease in corrosion rate and consequently increases the corrosion resistance. In addition, the anodized sample achieved the highest corrosion resistance at 15 V.","PeriodicalId":50285,"journal":{"name":"International Journal of Technology Management","volume":null,"pages":null},"PeriodicalIF":1.4000,"publicationDate":"2023-06-28","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Surface Coating Effect on Corrosion Resistance of Titanium Alloy Bone Implants by Anodizing Method\",\"authors\":\"E. O. Ningrum, I. Khoiroh, Hanifah Inas Nastiti, Ryan Anindya Affan, A. D. Karisma, Elly Agustiani, A. Surono, H. Suroto, S. Suprapto, Lulu Sekar Taji, Sinung Widiyanto\",\"doi\":\"10.14716/ijtech.v14i4.6146\",\"DOIUrl\":null,\"url\":null,\"abstract\":\". In the presented work, the formation of anodic oxide film on Ti-6Al-4V ELI (Extra Low Interstitial) alloy in 0.02 M trisodium phosphate (Na 3 PO 4 ) electrolyte solution using various voltages were investigated. The color produced by the anodizing, the intensity of TiO2 content, the thickness of the oxide layer, and the corrosion rate were examined. It was obtained that the color appearance of Ti-6Al-4V ELI could be changed easily by altering the applied voltages. The higher the voltage applied in the anodizing process, the thicker the titanium oxide layer formed. The corrosion resistance analysis in a Simulated Body Fluid revealed that the non-anodized specimen showed a higher corrosion rate compared to the anodized specimen. The increase of oxide layer thickness leads to a significant decrease in corrosion rate and consequently increases the corrosion resistance. In addition, the anodized sample achieved the highest corrosion resistance at 15 V.\",\"PeriodicalId\":50285,\"journal\":{\"name\":\"International Journal of Technology Management\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":1.4000,\"publicationDate\":\"2023-06-28\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"International Journal of Technology Management\",\"FirstCategoryId\":\"91\",\"ListUrlMain\":\"https://doi.org/10.14716/ijtech.v14i4.6146\",\"RegionNum\":4,\"RegionCategory\":\"管理学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"ENGINEERING, MULTIDISCIPLINARY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Technology Management","FirstCategoryId":"91","ListUrlMain":"https://doi.org/10.14716/ijtech.v14i4.6146","RegionNum":4,"RegionCategory":"管理学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"ENGINEERING, MULTIDISCIPLINARY","Score":null,"Total":0}

引用次数: 0

摘要

．本文研究了Ti-6Al-4V ELI(特低间隙)合金在0.02 M磷酸三钠(na3po4)电解液中不同电压下阳极氧化膜的形成。考察了阳极氧化产生的颜色、TiO2含量强度、氧化层厚度和腐蚀速率。结果表明，通过改变外加电压可以很容易地改变Ti-6Al-4V ELI的外观颜色。阳极氧化过程中施加的电压越高，形成的氧化钛层越厚。在模拟体液中的耐蚀性分析表明，与阳极处理的样品相比，未阳极处理的样品具有更高的腐蚀速率。随着氧化层厚度的增加，腐蚀速率明显降低，从而提高了耐蚀性。此外，阳极处理后的样品在15 V时具有最高的耐腐蚀性。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Surface Coating Effect on Corrosion Resistance of Titanium Alloy Bone Implants by Anodizing Method

. In the presented work, the formation of anodic oxide film on Ti-6Al-4V ELI (Extra Low Interstitial) alloy in 0.02 M trisodium phosphate (Na 3 PO 4 ) electrolyte solution using various voltages were investigated. The color produced by the anodizing, the intensity of TiO2 content, the thickness of the oxide layer, and the corrosion rate were examined. It was obtained that the color appearance of Ti-6Al-4V ELI could be changed easily by altering the applied voltages. The higher the voltage applied in the anodizing process, the thicker the titanium oxide layer formed. The corrosion resistance analysis in a Simulated Body Fluid revealed that the non-anodized specimen showed a higher corrosion rate compared to the anodized specimen. The increase of oxide layer thickness leads to a significant decrease in corrosion rate and consequently increases the corrosion resistance. In addition, the anodized sample achieved the highest corrosion resistance at 15 V.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

International Journal of Technology Management 管理科学-工程：综合

CiteScore

2.70

自引率

3.60%

发文量

审稿时长

6-12 weeks

期刊介绍： The IJTM aims to provide a refereed and authoritative source of information in the field of managing with technology, and the management of engineering, science and technology. It seeks to establish channels of communication between government departments, technology executives in industry, commerce and related business, and academic experts in the field.