热输入对钽铌合金焊缝组织和强度的影响

M. Bexiga , A. Tavares , F. Melo , A. Loureiro
{"title":"热输入对钽铌合金焊缝组织和强度的影响","authors":"M. Bexiga ,&nbsp;A. Tavares ,&nbsp;F. Melo ,&nbsp;A. Loureiro","doi":"10.1016/j.ctmat.2016.06.013","DOIUrl":null,"url":null,"abstract":"<div><p>Welding of niobium and tantalum materials is currently conducted in vacuum or inert gas chambers, which limits the size of the equipment to be produced. The objective of this study is to investigate the means to make TIG welding on these materials in atmospheric environment and analyse the effect of heat input on the properties of welds. It was found that it is possible to make TIG welds on these materials in atmospheric environment, provided that adequate protection is ensured on the face and root sides of welds. The increase of weld heat input coarsens the microstructure in melted and heat affected zones of both materials; increases also hardness in melted zones and tensile strength of welds, and there is not an obvious loss of ductility in heat affected zones.</p></div>","PeriodicalId":10198,"journal":{"name":"Ciência & Tecnologia dos Materiais","volume":null,"pages":null},"PeriodicalIF":0.0000,"publicationDate":"2017-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://sci-hub-pdf.com/10.1016/j.ctmat.2016.06.013","citationCount":"6","resultStr":"{\"title\":\"Effect of heat input on microstructure and strength of welds in tantalum and niobium alloys\",\"authors\":\"M. Bexiga ,&nbsp;A. Tavares ,&nbsp;F. Melo ,&nbsp;A. Loureiro\",\"doi\":\"10.1016/j.ctmat.2016.06.013\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>Welding of niobium and tantalum materials is currently conducted in vacuum or inert gas chambers, which limits the size of the equipment to be produced. The objective of this study is to investigate the means to make TIG welding on these materials in atmospheric environment and analyse the effect of heat input on the properties of welds. It was found that it is possible to make TIG welds on these materials in atmospheric environment, provided that adequate protection is ensured on the face and root sides of welds. The increase of weld heat input coarsens the microstructure in melted and heat affected zones of both materials; increases also hardness in melted zones and tensile strength of welds, and there is not an obvious loss of ductility in heat affected zones.</p></div>\",\"PeriodicalId\":10198,\"journal\":{\"name\":\"Ciência & Tecnologia dos Materiais\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2017-01-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://sci-hub-pdf.com/10.1016/j.ctmat.2016.06.013\",\"citationCount\":\"6\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Ciência & Tecnologia dos Materiais\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S087083121730068X\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Ciência & Tecnologia dos Materiais","FirstCategoryId":"1085","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S087083121730068X","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 6

摘要

铌和钽材料的焊接目前是在真空或惰性气体室中进行的,这限制了要生产的设备的尺寸。本研究的目的是探讨在大气环境下对这些材料进行TIG焊接的方法,并分析热输入对焊缝性能的影响。结果表明,在大气环境下对这些材料进行TIG焊接是可能的,只要保证焊缝的表面和根部得到充分的保护。焊缝热输入的增加使两种材料的熔化区和热影响区组织变粗;还增加了熔化区的硬度和焊缝的抗拉强度,并且在热影响区没有明显的塑性损失。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Effect of heat input on microstructure and strength of welds in tantalum and niobium alloys

Welding of niobium and tantalum materials is currently conducted in vacuum or inert gas chambers, which limits the size of the equipment to be produced. The objective of this study is to investigate the means to make TIG welding on these materials in atmospheric environment and analyse the effect of heat input on the properties of welds. It was found that it is possible to make TIG welds on these materials in atmospheric environment, provided that adequate protection is ensured on the face and root sides of welds. The increase of weld heat input coarsens the microstructure in melted and heat affected zones of both materials; increases also hardness in melted zones and tensile strength of welds, and there is not an obvious loss of ductility in heat affected zones.

求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信