The Effectiveness of Thermal Gas Treatment on Bazenov Formation Using Numerical Simulation

This paper presents a description of the technology for numerical simulation of thermal gas treatment on Bazhenov formation, taking into account features of Bazhenov formation and thermal gas treatment and assumptions of the simulator. First of all it is required to determine the following parameters: voidness (porosity), permeability, fracturing, free oil (initial oil saturation), TOC (Total Organic Carbon). And also it is important to establish dependence of the parameters on temperature and pressure. Then, the process of thermal gas treatment can be conditionally divided into several stages: Effective production of light oil from drainable (permeable) zones (miscible displacement in front of the combustion front)Involvement of zones of reservoir containing kerogen during to heat treatment (pyrolysis reaction) and liberation of light oil and gaseous hydrocarbons from "locked" zones of reservoir.Involvement of the initially non-drainable (impermeable) zones of reservoir, named matrix (doesn’t mean the same as in dual porosity/permeability system). Especially these zones are the greatest interest among reservoir engineers because it can contain huge reserves of hydrocarbons. As a result of the steps described above, a 2D model was created, a numerical realization of the key processes taking place during thermal gas treatment on Bazhenov formation was carried out. Further, the main zones characterizing the process were identified and a physical justification for the individual indicators was given. Calculations of variants involving the matrix in the drainage process were carried out. The calculated technological effect over a 50-year period of thermal gas treatment on the model (involving the production from matrix) was about 50% of the additional oil production, relative to the thermal gas treatment variant without involvement of matrix. According to the results of the work, an evaluation of the efficiency of wet combustion was carried out during thermal gas treatment. The results of the calculations clearly demonstrate the advantage of using wet combustion. It is as stimulation of production of reservoir oil, as of additional synthetic oil as a result of kerogen pyrolysis reaction.