Hybrid Integration of Taguchi Parametric Design, Grey Relational Analysis, and Principal Component Analysis Optimization for Plastic Gear Production

The identification of optimal processing parameters is an important practice in the plastic injection moulding industry because of the significant effect of such parameters on plastic part quality and cost. However, the optimization design of injection moulding process parameters can be difficult because more than one quality characteristic is used in the evaluation. This study systematically develops a hybrid optimization method for multiple quality characteristics by integrating the Taguchi parameter design, grey relational analysis, and principal component analysis. A plastic gear is used to demonstrate the efficiency and validity of the proposed hybrid optimization method in controlling all influential injection moulding processing parameters during plastic gear manufacturing. To minimize the shrinkage behaviour in tooth thickness, addendum circle, and dedendum circle of moulded gear, the optimal combination of different process parameters is determined. The case study demonstrates that the proposed optimization method can produce plastic-moulded gear with minimum shrinkage behaviour of 1.8%, 1.53%, and 2.42% in tooth thickness, addendum circle, and dedendum circle, respectively; these values are less than the values in the main experiment. Therefore, shrinkage-related defects that lead to severe failure in plastic gears can be effectively minimized while satisfying the demand of the global plastic gear industry.